Wiki User
∙ 2007-08-07 19:33:47Loosen the bolt that holds the alternator to the bracket. Tip the alternator toward the enginge. Place a new belt on, making sure you catch all of the pulleys. Pivot the alternator away from the engine to tighten the belt. When belt is tight, re-secure the bolt you loosened earlier.
Wiki User
∙ 2007-08-07 19:33:47disconnect negative battery tml.,remove the plug from the alternator,remove the main battery wire from the stud on the alternator, remove the lock bolt, swing alternator down to remove belt, remove pivot bolt, swing alt. until its out. replacement is reverse of remova; To take out the alternator on a 88' tercel, you have to do it from under the car
Loosen alternator remove old belt. Reroute new belt, tighten alternator.
Instructions on replacing 1996 Toyota Tercel timing belt?
Loosen the tensioner bolt on your alternator. Slide the alternator to the left. Remove the alternator belt. Put the new alternator belt on and tighten the tensioner bolt.
i have a 99 tercel, help?
loosen the one or two bolts holding the alternator in place, i believe 14mm, then loosen the 12mm on the adjuster (side) and "screw" the 12mm bolt down to lower the alternator down enough and replace the belt. This is almost the same for every Toyota engine which doesnt use an automatic belt tensioner (serpentine) on the alternator.
how do you replace 1997 alternator belt
You don't have too but it is recommended. My brother owns a garage and he always ask people if they want to replace the timing belt because you are right there at the timing belt anyway.
loosen the bolt on the bottom of the alternator.
No prob: Loosen the adjusterbolt, give the alternator a whack with a SOFT hammer towards the engine, remove the old belt mount the new one! I usally use the handle of the hammer as "lever" behind the alt. when tightening the new belt! Note: you should be able to move it 1cm. up and dowm!!! Starlet4life.dk
To replace the alternator belt on a Citroen Berlingo, you have to locate the tensioner. You can loosen it to replace it.
BeltsYes, you must remove all of the belts to replace the alternator belt. The compressor belt first, then the power steering belt then the alternator belt.