A photocontrol uses light to activate the switch. When the sensor does not detect light the circuit is broken and the switch is deactivated.
If a single pole switch is wired to be a master switch, the switch would have to be in the on position for any other control devices to operate. Turning the master switch off would eliminate power to all devices (and/or loads) which it was serving. For example, some homes have a switch to control their outside light. If the outside light has a photo eye (the light will only come on at night), the switch is the master switch. Another example would be the breakers in an electrical panel. Each breaker would be the "master switch" for the circuit it protects. The main breaker in the panel would be the "master switch" for the entire home.
this is due the action of the photo transducer.when the light falls on the swtich, suddenly the resistance decreases.and the switch is closed.
There are many places where one could buy a timer to control a light switch. One looking for a timer to control a light switch should visit popular on the web sources such as Lowe's, Intermatic, and Honeywell Store.
Its at the top of the clutch pedal there is a cruise control switch disengage switch at the bottom and the one above that is the clutch inhibitor switch.
You build an electronic device to control a transistor switch that causes a mechanical device to push the switch. Now days we bypass the mechanical switch and the circuit can do the switching.
A switch that can be used to control the working of home appliances like flush system, hand dryer or else. The wireless switch needs no remote control for its working. You only want to move your hand between the infrared LED and photo transistor to control the device or load.
A switch that can be used to control the working of home appliances like flush system, hand dryer or else. The wireless switch needs no remote control for its working. You only want to move your hand between the infrared LED and photo transistor to control the device or load.
turn it on take the photo view the photo switch it off
Switch - 1975 Photo Finish 3-21 was released on: USA: 2 July 1978
Every switch performs a control function. On / Off is a control function.
To control a light with a switch, the switch has to be connected in series with the light fixture.
A proximity switch operated when you bring your hand or finger close to it. That's what's in lamps that turn on when you touch the base of the lamp. A photo switch operates when light shines on it. That's what's on streetlights that turns them on automatically after dark.
replacing the volume control switch on 2008 flhx how to replace the volume control switch on 2008 flhx
Remove the temperature control switch wiring harness. Remove the temperature control switch retaining screws. Reverse the process to install the new temperature control switch.
electric switch, electrical switch, control, controller
If a single pole switch is wired to be a master switch, the switch would have to be in the on position for any other control devices to operate. Turning the master switch off would eliminate power to all devices (and/or loads) which it was serving. For example, some homes have a switch to control their outside light. If the outside light has a photo eye (the light will only come on at night), the switch is the master switch. Another example would be the breakers in an electrical panel. Each breaker would be the "master switch" for the circuit it protects. The main breaker in the panel would be the "master switch" for the entire home.
To take a photo switch the Camera/Video switch so that you see the Camera icon