How hard is it to change all the light blubs in the dash for a 97 Toyota Camry Toyota ran test said all the blubs are no good But they want way to much to fix?

Answer 1

It is very hard to believe that all the light bulbs went bad at the same time. That is almost impossible. I would suspect you have another problem, such as a blown fuse. What test did you run? The only way to test a bulb would be to remove it and check the continuity. auto zone is good at telling you want bulbs you need and how to change If it is your bulbs, I have changed mine many a time. Take a flat head screwdriver any pry off the modling around the gayges. Should pop out. This is of course only after u take out the 2 screws invisble to u unless you look under the lip, right above the gauges. once this is done it will let u pull the cluster out. There should still be the plastic cluster holding on, take a screwdriver and realease all of the clips, pull it out carefullythe mileage reset gauge CAN break off :). dont unplug just pull it out and turn upside down.... lights are underneath

ok i agree with the last comment the gauges are a removable panel remove the whole panel and they are underneath just a turn/twist screw holds the bulbs in place.

== ==