water meter measures the water pressure ,meanwhile an ammeter measures thr current of the circuit
Electrical current is measured with an "ammeter". (The unit of current is "ampere". Measure it with an 'ampere-meter' ==> 'amp-meter' ==> 'ammeter'.)
There is no volt meter or amp meter in a DC watt meter.
The ammeter will only read when connected properly. If the meter is connected backwards, then the meter reads the wrong way. If it is a digital ammeter then it may not work at all.
It is called a Tell Tale because it tells you the current of the circuit.
An ammeter measures the amount of current flowing in a circuit
ammeter
SMOKE!!! Yiii-haaaa! An ammeter is always as low a resistance as possible. That way, the current that you measure in a circuit using the meter will be the same as if the meter were not there. So putting an ammeter in parallel with a circuit means that you just short circuited the circuit you were intending to measure. Poof! There goes your ammeter!An ammeter has a very low internal resistance. So, if it is connected in parallel with a load, it will short-out that load. The resulting high current flowing through the ammeter may severely damage the meter (and possible harm the user), although most are fitted with fuses to protect them.
ammeter, which is understood as an amp meter
you dont you need an ammeter for that
A: An ammeter actually is a voltmeter measuring the voltage drop across a very small shunt resistance. They can measure AC or DC, make sure the meter is rated for the anticipated current, and always connect in series.
The instrument used to measure electrical current is called an ammeter, which is actually a shortened form of 'amp meter'. The current is measured in amperes. In scientific labs, a much more sensitive instrument called a galvanometer is used to measure very small currents.
You need to use an ammeter - usually the current setting on a multi-meter. The meter should be connected to the circuit in series.