0
In a distribution transformer's star-connected secondary, the common point of connection is called the 'star point' and is connected to earth. The star point then provides the neutral connection for the transformer secondary, providing a return path for any unbalanced currents due to an unbalanced three-phase load.
This arrangement provides a four-wire distribution system, comprising three line conductors and one neutral conductor (in addition, there are various methods of providing an earth connection to consumers). The line-to-line voltage is called a line voltage (in the UK, 400 V), while a line-to-neutral voltage is called a phase voltage (in the UK, 230 V). The line voltage being 1.732 x phase voltage.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What is the star point of a CT?
The term, 'star point', refers to the common point of connection for the three windings of a star-connected (wye-connected) transformer connection. The star point is usually earthed (grounded) and provides the neutral point of the connection.
How can you how can you detect wye from delta with neutral connections?
The star connection has three phase terminal leads and one neutral lead. In case of delta connection it has got three phase terminal leads. the star connection is generally represented by Mercedes symbol with neutral line drawn from the mid point. The delta is represented like a triangle symbol with noneutral line shown.
Why does delta connection have no neutral connection?
Lets compare between a star and delta connection in 3-phase power types. In a star connection, there are 6 connections (A1, B1 and C1 being the outer arms of the 3 armed star and at the centre, A2, B2 and C2). The center is called the neutral or star point which carries out the any unbalanced current loads through its connection. That is why if you lose out the neutral point in a star connection, there will be an overflow of current through to the loads. The loads also take in more current, generating much more power and could damage the appliance you are using and the components the line current is connected to, since excess heat and overworking may result.In a delta connection, the connection has only 3 and on a piece of paper it is sketched as the connections being joined arm to arm. One side is A phase, B phase and C phase. Getting to the point, a Delta connection does not have a earth wire because the live voltage is always the same throughout the connection. Since phase and line voltage are the same and constants. It also means the line current will change without affecting other components within the circuit. Balanced Delta connected circuits or loads can only have their power supply sourced from a star connection and a balanced Star load can only have their voltage supply come from a delta connection.Another AnswerWith a delta connection, the phasor sum of the three line currents is zero, whether the load is balanced or unbalanced, so no neutral is necessary.
How does the NGT works?
NGT means Neutral Grounding Transformer. It is Connected between TRF star point and earth point. It is protect the trf from short ckt .
What is the oscillating neutral in transformer?
An 'oscillating' neutral can exist when the star point of a three-phase, star (wye) connected, secondary winding becomes disconnected from earth (ground) -e.g. if copper thieves have removed the earth conductor or it simply becomes disconnected. This results in a 'floating neutral', in which the phase voltages are no longer necessarily equal to each other (in other words, the three phase voltages have become 'unbalanced') the extent to which depends upon how unbalanced the supplied load is. An 'oscillating' neutral occurs when the displacement of the neutral point changes as it responds to changes in the unbalanced load currents.
What is the star point of a CT?
The term, 'star point', refers to the common point of connection for the three windings of a star-connected (wye-connected) transformer connection. The star point is usually earthed (grounded) and provides the neutral point of the connection.
How genrate neutral in star connection?
A neutral isn't 'generated'. The neutral exists naturally at the star point of a star-connected system -i.e. the common point of connection between the three phases which is normally connected to earth, either directly, or via some sort of impedance which is designed to restrict the value of any fault current that might occur.
How can you how can you detect wye from delta with neutral connections?
The star connection has three phase terminal leads and one neutral lead. In case of delta connection it has got three phase terminal leads. the star connection is generally represented by Mercedes symbol with neutral line drawn from the mid point. The delta is represented like a triangle symbol with noneutral line shown.
Why star point of star connected motor is not grounded?
Another AnswerA motor represents a balanced three-phase load and, therefore, there is no neutral current, so there is no requirement for a neutral connection. Regulations prevent an earth being used as return, so the star point shouldn't be earthed either.
What is the definition of star connection?
The definition of star connection is a connection of the ends of phase windings at the star point.
Why neutral is ground in the circuit?
In the transformer at the secondry side one end of the winding will make star connection means 0 point there will be no voltage at that end if any leake voltage appear at that point it have to ground that what all the neutral points to be grounded
Why we get the 0 level in trans farmer when we use delta to star connection when you get the 220 volts at each terminals of star connection of transformer how we get 0 level or neutral equals to 0?
A: In the USA there is D delta connection or Y connection. The Y center point may not be zero if there is circulating current due to mismatch of the phases
Diagram of star-delta connection of motor?
Unfortunately, WikiAnswers does not support graphic images, so I will have to describe the connection in words. There are three windings, each with two wires. That is six connections. There are four connections in a star (wye) source, three hots and a neutral. The star connection has one end of all three windings connected (together) to neutral and the other ends connected to each hot. The delta connection has each winding connected end-to-end to each other in a ring, and each common point is connected to a hot. Neutral is not used in delta.
Why does delta connection have no neutral connection?
Lets compare between a star and delta connection in 3-phase power types. In a star connection, there are 6 connections (A1, B1 and C1 being the outer arms of the 3 armed star and at the centre, A2, B2 and C2). The center is called the neutral or star point which carries out the any unbalanced current loads through its connection. That is why if you lose out the neutral point in a star connection, there will be an overflow of current through to the loads. The loads also take in more current, generating much more power and could damage the appliance you are using and the components the line current is connected to, since excess heat and overworking may result.In a delta connection, the connection has only 3 and on a piece of paper it is sketched as the connections being joined arm to arm. One side is A phase, B phase and C phase. Getting to the point, a Delta connection does not have a earth wire because the live voltage is always the same throughout the connection. Since phase and line voltage are the same and constants. It also means the line current will change without affecting other components within the circuit. Balanced Delta connected circuits or loads can only have their power supply sourced from a star connection and a balanced Star load can only have their voltage supply come from a delta connection.Another AnswerWith a delta connection, the phasor sum of the three line currents is zero, whether the load is balanced or unbalanced, so no neutral is necessary.
When was Black Star at the Point of Darkness created?
Black Star at the Point of Darkness was created in 1990.
Why high voltage step down transformer uses delta as primary and wye connection as secondary?
because usually the step down transformers are used for supply so it requires neutral(return)path, we cant take neutral path through delta connection hence the star connection is used and mostly in step-down the star connection is used.
What is the difference between star delta and wye delta?
With a delta connection, picture a triangle. Each side of the triangle is a transformer or motor winding. Call the 3 corners of the triangle A, B, and C. There are only 3 wires except for a safety ground, which has no connection to, nor is any part of, the power transmission service lines.but for the star connection take our triangle above and use your wire cutters (literally) to cut the triangle apart at the corners. rearrange the three sides (transformer or motor windings) to form a Y. Where the three sides join in the centre, connect a fourth wire. Call this wire "neutral". Call the three ends A, B, and C. Connect the 3 supply service lines to A, B, and C.
