If you know what you're doing, it shouldn't even take an hour. If you don't have a clue, it could take 5.
replace brake light switch located on brake pedal under dash
what year model
you need to replace the brake light switch that is located above the brake pedal underneath the dasboard Here's a link to a video that 1aauto.com has that shows you how to replace the brake light switch.
How to replace spedo cable f250
Lift the car, remove the tire, remove the brake shoes/calipers, remove and dispose of the old pads. Put in the new pads, replace the brake shoe/caliper, replace the tire and lower the car.
Lift the vehicle with a jack, remove the tire, remove the caliper/brake shoe, remove the old brake pad. Dispose of the old brake pad properly, put in the new brake pad, replace the caliper/brake shoe and replace the tire, then lower the vehicle to the ground.
Should be "peel off" rotors if not you will need a spanner socket only
Directions on how to replace a fuel pump on a 1995 F250 diesel 7.3
brake pressure loss and pedal going straight to floor is mostly caused by loss of brake fluid or air in brake system look under car and on inside of wheels to see if fluid is leaking. check brake fluid level at master cylander if no fluid seems to be leaking, have the brake system bled for air. this is the simplest remedy to start with if that doesnt fix it have the brake power booster checked to make sure fluis is not leaking into that also check on firewall in engine bay round booster for fluid and on inside of cab on firewall for fluid
Replacing a ball joint on a Ford 250 requires removing the wheels, brake assembly, as well as the spindle. From there, the ball joints can be removed and replaced.
no. the bolt pattern was changed
Yes.