There are, 2000/1000 = ,amps in 2000 milliamps.
For the math challenged that is 2 amps.
200ma is .200 amps or .2 amps
1.3 amps
3000 milliamps is equal to 3 amps. To convert milliamps to amps, you divide by 1000.
5.8 amps
There are 0.075 amps in 75 milliamps.
200ma is .200 amps or .2 amps
No No No. If your supply can give .2A, and you need 2 Amps, your supply's not going to cut it.
Yes, the maximum that the adapter can deliver is 1300 mA or 1.3 amps. The maximum that the device will draw is 200 mA or .2 of an amp.
YES!If you have a TV antenna amplifier rated at 12 Volts and 200 milliamps, you can use any power supply that will deliver at least 200 milliamps at 12 Volts. The important item is to keep the 12 volts at 12 volts. note: 200 milliamps is 0.2 amps. Even if you had a power supply that delivered 2000 amps at 12 volts you would be OK as it will only draw the 200ma that it needs.
Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.
.1 amps will give you .1 amps.
500 KVA how many amps? almost 650 Amps according to formula.
10-2 Amps
1.3 amps
10 amps
it is either 110 amps or 135 amps
DVD players are low energy users. Although they may show a peak current of up to 1 amp as they are turned on, while they are running, they are typically using between 20 - 35 Watts. That translates to a current draw of about 100mA from a 230 Volt supply and 200mA from a 110V supply.