Watts (5500) divided by volts (120) = amps
Simple
There aren't any amperes in 5500 W. Amperes are used to measure electric current, whereas watts are used to measure power. These are two completely different quantities!
It depends on how much volt you have watts divided by volts equal amps 6000w / 120v equals 50 amps
The amps actually is dependent of the voltage. so it purely depends upon the voltage terms being used
51.66 amps
<<>>
To correctly answer this question the generator output voltage must be stated. I = W/E. Amps = Watts/Volts.
Watts is the product of amps x volts. Need voltage to tell you the amperage. To do it yourself just divide the watts by volts.
7 amps
27 amps
8000 BTU =2344.66 watts 1 watt = 3.412
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
9000 watts is zero amps. Amps are the product of amps times volts. Without a voltage stated an answer can not be given. I = W/E, Amps = Watts/Volts.
Watts = Volts * Amps Therefore: 70 Watts / 13.8 Volts = 5.07 Amps
The sizing of wire is calculated by the amount of current the circuit draws. To find the amperage when the wattage is known use the following formula, Amps = Watts/Volts. 6500/240 = 27 amps. A #10 AWG copper conductor will limit the voltage drop to 3% or less, when supplying 27 amps at 240 volts for a 100 foot distance.
8000 BTU =2344.66 watts 1 watt = 3.412
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
9000 watts is zero amps. Amps are the product of amps times volts. Without a voltage stated an answer can not be given. I = W/E, Amps = Watts/Volts.
There are zero watts in 730 amps. Watts is the product of amps times volts. As you can see without a voltage no answer can be given.
Watts = Volts * Amps Therefore: 70 Watts / 13.8 Volts = 5.07 Amps
Amps, volts and watts are interrelated, but you need to do a little math. Amps * Volts = Watts
How many Amps is the fridge pulling? Multiply the Amps by the 120V circuit you're plugging into and you'll get your Watts.
The sizing of wire is calculated by the amount of current the circuit draws. To find the amperage when the wattage is known use the following formula, Amps = Watts/Volts. 6500/240 = 27 amps. A #10 AWG copper conductor will limit the voltage drop to 3% or less, when supplying 27 amps at 240 volts for a 100 foot distance.
I t depends. Watts = Amps times volts. 40 amps x 120 volts =4800 watts or 40 Amps x 12 volts = 480 watts.
It's watts divided by volts equals amps. Example: 1200 watts at 120 volts is 10 amps. To get the watts if you know the amps, multiply the amps times the volts. 10 amps at 120 volts is 1200 watts.
Watts is volts times amps, so 12 x 30 = 360 watts
To obtain the amperage from 2000 watts the voltage is needed. I = W/E. Amps = Watts/Volts.