answersLogoWhite
Auto Parts and Repairs
Ford Expedition Eddie Bauer
Ford Expedition XLT
Grand Am SE

How many bolts does the starter has?

343536

Top Answer
User Avatar
Wiki User
2005-10-02 18:28:04
2005-10-02 18:28:04

Starters are usually held on by 2 bolts. Sometimes 3.

1

Related Questions

User Avatar

Two bolts hold the starter to the block. There may also be a brace on the other end of the starter.

User Avatar

Three bolts hold it to the engine.

User Avatar

The 2000 Mercury Sable starter will have three retaining bolts. There will be two cable retaining nuts on the front of the starter.

User Avatar

Some have 2 bolts, others have 3 bolts and a few have another bracket for support at the front of the starter. Depends on the application you failed to mention.

User Avatar

There are 2 bolts that hold the starter in place and 2 nuts that hold the wiring to the solenoid.

User Avatar

I believe the correct answer is 2 bolts

User Avatar

Depends On What The Starter Is From. Car Model Engine Size, Or Mounting Bolts Ect. If It Is The Bolts That Assemble The Starter< You Can Get These At A Starter Alternator Shop. The Mounting Bolts. Drop By The Dealer Parts House They Can Fix You Up.

User Avatar

The 1994 Toyota pickup truck starter mounting bolts can be found on the head of the starter. There will be three mounting bolts.

User Avatar

starter bolts loose? answer starter bolts loose or stripped teeth on starter or flywheel

User Avatar

Most starters have two VERY long bolts that retain it to the bell-houseing of the transmission.

User Avatar

how do i remove old starter from 1996 Pontiac transport

User Avatar

how many mounting bolts hold 2002 chevy tracker starter in place

User Avatar

what size are the bolts that hold a starter on a 1995 f 250 powerstroke

User Avatar

Gas engine has a bolt at the top and a nut on a stud on the bottom. The diesel starter is held by three bolts.Gas engine has a bolt at the top and a nut on a stud on the bottom. The diesel starter is held by three bolts.

User Avatar

What size starter bolts for an 1993 Ford F250 4x4 automatic

User Avatar

Disconnect the negativebattery terminal, starter is accessible from under the car passenger side, it bolts into the transmission with 3 bolts. Disconnect the wires from the starter, remove the bolts and reinstall new starter, reconnect wires.

User Avatar

Remove the positive battery cable from your 2000 Saturn battery. Remove the cables from the front of the starter. Remove the three starter retaining bolts. Reverse the process to install the new starter.

User Avatar

I looked up the 1995 Lincoln Town Car on one of the Ford websites and the drawings show that the starter flange has ( 2 bolts )

User Avatar

there are only 2 bolts one on top and one on the bottom assuming that you have removed the wires (there is a small 5mm bolt the holds a connection to the starter, the bolts that actually hold the starter on are 15mm i believe.

User Avatar

three bolts, make sure the battery is disconnected first!gmjim

User Avatar

there are 3 mounting bolts on the starter motor.one is at the yop side of starter and you will need a socket with long extension to get at it PS : if you use a universal joint extension from socket set it will be even easier to get at


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.