answersLogoWhite
notificationBell

Top Answer
User Avatar
Wiki User
Answered 2011-03-08 11:52:19

0.52 cubic yards = 14.04 cubic feet.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Related Questions


52 thousandths of one gram


There are many countries with domestic telephone area code 052 or similar. It is impossible to say which one you're asking about.



The 2000 Ford Explorer owners manual shows .052 to .056 inch for your 5.0 L ( 302 cubic inch ) V8 engine


.052 inch ( 52 /1000's ) 1.3 to 1.4 mm is .052 to .056 inch


13/250= .052 *100 = 5.2%


The ISBN of My Driver is 978-1-84659-052-8.


The state of Michigan has three quarters of its borders as shore lines. The shore line of Michigan is a total of 3, 052 miles



The gap is suppose to be between .052 - .056



The ISBN of Hunting the Snark is 1-55778-052-8.


The ISBN of Socialism or Barbarism is 1-58367-052-1.


According to the 1997 Mercury Mountaineer Owner Guide : For the 5.0 liter / 302 cubic inch V8 engine : ( the spark plug gap is .052 to .056 inch ) * confirm with the Vehicle Emissions Control Information ( VECI ) decal in the front of your engine compartment


2 724 900 sq.km 1 052 085 sq.mi


.052 to .056 is the acceptable range for the 1.9l



a fraction .052 = 52/1000 this reduces to 13/250


0.52 = (0 x 1) + (5/10) + (2/100)



The ISBN of Moderato Cantabile is 978-1-84749-052-0.


Area code 052 in Ireland (or +353 52 for international calls) is Clonmel, including Cahir, Killenaule, Fethard, Clerihan, Kilsheelin, Newcastle, Grange, Ballymacarbry, Ballyporeen, Clogheen, Ardfinnan, New Inn, Mullinahone, Drangan, and Ballingarry.


.052 - .056 inch according to the owners manual


he use a Dunlop NPS, Gauges (.010 to .052)


4 AWG is the initial answer without considering the length. For 210 feet of 4 AWG the resistance is .052 ohms. So using Ohm's Law the voltage drop would be 60 x .052 = 10.92 volts. Usually the drop should be less than 10 % of the supply voltage. So if the supply was 120 volts you would be allowed 12 volts and for 240 volts 24 volts of a drop. So you be okay for using either 120 or 240 volts and 4 AWG wold support the current and the length. There may be other factors in your application, but from what you specified use 4 AWG.