15 gallons
10
1 gallons
what is it
Rr
6.3 gallons of water us used
It depends on the length of the shower, and the flow of water. Shower heads can usually allow anywhere between 2.5 and 5 gallons of water a minute. Most baths require 30-50 gallons of water. To save energy the length of the shower x, multiplied by the water flow y, must equal less than the amount of water used in the bath. X*Y (Minutes/Gallons) < Gallons in Tub
It depends on how big your bath is, and how fast the water is running in the shower.An average bath uses between 30-50 gallons of water. An average four minute shower with an old shower head uses 20 gallons of water. With a low-flow shower head, you only use 10 gallons of water.So a shower is probably better. People who are interested in saving water would try to limit their shower time to four minutes. You don't need 10 minutes to wash yourself.
We can't provide graphs on WikiAnswers. However, here is an answer to a similar question: It depends on your shower head and whether it has a flow restrictor in it and how long you shower. If your home was built before 1992, chances are your showerheads put out about five gallons of water per minute (gpm). Multiply this by the number of minutes you're in the shower, and the water adds up fast! An average bath requires 30-50 gallons of water. The average shower of four minutes with an old shower head uses 20 gallons of water. With a low-flow shower head, only 10 gallons of water is used. To test the amount of water used in a shower vs. a bath is to put the plug in the bath next time you take a shower (but not a stand-alone shower as you might spill over the lower shower wall). After you've showered, see how much the tub filled up. If there is less water than you would usually have in a bath, then you will probably save money by taking a shower instead of a bath.
millions of gallons of water
Aim the shower into a bucket. Let it run for one minute. Measure how much water that has collected in the bucket. Now you have the flow per minute. Next, time yourself when you take a shower. Multiply the minutes spent showering with the flow rate to find the total amount of water used.
Obviously it partly depends on the shower head, but most will give about 2.5 gallons per minute, so you are using about 12 gallons of water, possibly about 8 - 9 of it hot.Place a 1 liter bottle below the shower and measure how many seconds it will require to fill it. Then:Number of gallons in five minutes = 78,1/ Number of secondsAn average shower head emits about 1.3 -1.5 gallons per minute, so that would be 7 -8 gallons.
Can't say because this depends on the flow coming out of the shower head. If the flow is 1ltr per minute then in 10 minutes you will use 10 litres The average shower in the US flows at a rate of 7.9 liters per minute, or 2.1 gallons per minute. A ten minute shower would consume 79 liters or 21 gallons of water.
Most newer shower heads restrict water flow to around 3.5 gallons a minute max. . .this would equal around 35 gallons for a 10 minute shower
That depends on the fuel and the cost of the fuel and the temperature of mains water and the shower.
depends on how much you want, like i have 700 gallons.
4 gallons if head delivers 2 gallons/minute