How to take the door panel off a 2002 mercury mountaineer?
On a 2001 Mercury Mountaineer : Underneath the Mountaineer , below the drivers door , mounted on the frame rail
There are seat belts for ( 5 ) people
Yes, the door panel needs to come off to replace the speaker.
They are located in the door latch on the door
I'm assuming it is the same as a 1998 Ford Explorer : Underneath the vehicle , below the drivers door , mounted on the frame rail
the four door speakers are 6x8 and the sob if you have one is 8"
wher do i find the code for door for a 2001
A door panel on a 2004 Mercury Mountaineer is held on by several screws. Once all the screws are removed the panel can easily come off.
spray your door latches with wd40.
passenage door will not open
Starting with the 2002 model , there is no automatic transmission fluid dipstick on the Mercury Mountaineer ( and the Ford Explorer , 4 door )
On a 2001 Mercury Mountaineer : The fuel filter is under the vehicle , below the drivers door , mounted on the frame rail
On a 2007 Mercury Mountaineer : Open the drivers door and on the end of the door ( or the latch pillar ) you will see an information sticker that shows the original size tires on the vehicle from the factory
The door ajar light might stay on in a Mercury Mountaineer if a door is not shut properly. Sometimes a door will seem like it is shut, but will not be shut enough to trip the light off. Check for dirt or other debris in the door latch for all doors.
On a 1998 Mercury Mountaineer : According to the Owner Guide : ( the fuel pump shut off switch / inertia switch is in the front passenger footwell behind the kick panel ) * the kick panel is the interior trim panel , just in front of the front door , beside the persons feet
You can get a diagram for the door lock assembly in the Haynes 99 Mercury Mountaineer Repair Manual. The book is available at most auto parts and major book stores.
You can not open the rear hatch door from the inside.
Yes, the Speaker is in the door.
Vin the relay panel ,
Its the blend door. It happened on my 98 Mercury Mountaineer. The motor shaft and the door have separated there is an easy fix look up blend door fix for 98 Mercury Mountaineer it just needs a small finishing nail and done
If you do a Google search on Ford Explorer blend door there are lots of articles
type it in www.google.com
i think you have to unscrew the whole door.
Actually , the first model year of the Mercury Mountaineer sport utility vehicle was 1997 and if you open the drivers door , on the end of the door you will see an information sticker that will show the size of the tire that originally came on the vehicle