8
It would take eight or nine to match a male blue whale, over 100 feet long.
probably not. You have to do some major measuring of the length width and height to see if there is clearance, then check the brackets on the original bumper. if they dont match, try fabricating the old brackets onto the new bumper and you should be good to go. probably not. You have to do some major measuring of the length width and height to see if there is clearance, then check the brackets on the original bumper. if they dont match, try fabricating the old brackets onto the new bumper and you should be good to go. probably not. You have to do some major measuring of the length width and height to see if there is clearance, then check the brackets on the original bumper. if they dont match, try fabricating the old brackets onto the new bumper and you should be good to go.
Yes, a good painter can match the color.
what other year mitsubishi galant rear bumper cover is compatable with a 2001 cover?
About 45 seconds to end of match but depends how long and what quality the match is,
There should be a hole behind the top of the bumper in the body, right above the license plate. Take the jack crank handle and insert it into the hole, and match the end of the handle to the fitting. Then unscrew the fitting. The spare tire will slowly lower itself.
There is probably nod difference in the integrity of these bumpers. As long as the rubber(decorative) parts match yours.
1 cm
call auto parts and check part numbers on both years to see if they match.
no it will not fit... cuz the holes where the bolt goes does not match....
Ruler
yes it does... however, the bumper must match the car. what i mean by that is, the sedan bumper will not fit the hatch. and vice versa. the clips are the same. the outer shell is shaped a little different. eg. the back bumper has a finger groove to make it easier to open the trunk. subtle differences like that.