The weight of fly ash per cubic foot is based on the specific gravity of the particular fly ash multiplied by the weight of water (62.4 lbs.) per cubic foot.
Most fly ash has a specific gravity between 2.15 and 2.30, depending on the source.
To calculate the weight per cubic foot of fly ash with a specific gravity of 2.3, the formula is as follows:
2.3 X 62.4 = 143.52 lbs per cubic foot
It varies based on the density of the mix, but should be around 145 lbs per cubic foot. 27cu ft/cu yd -> 27 x 145 = 3915 pounds per cubic yard
If the fly ash has not been compacted, the mass will be between 900 and 1500 pounds. If it has been compacted then the mass per cubic yard will increase to between 1900 and 2500 pounds.
3000
what is the biological,chemical and physical properties of fly ash when it is use as a carrier
type your answer here...
Mount Merapi has affected tons of countries around it because of the amount of ash that it has sent into the air. The ash has caused it impossible to fly airplanes
Humans weigh too much and can't run fast enough to fly. But they have minds to be able to build planes that can allow them to fly.
Volcanic ash might be said to be the cause of or the precursor to aviation agony. Agony is generally the suffering on a large scale by an individual or a group. With that in mind, let's look at the situation more closely.The ash presents a danger to the safe operation of a jet engine, and aircraft cannot fly safely through air that has large amounts of volcanic ash suspended in it. Airline people know this, and flights are rerouted or simply cancelled due to the inability of aircraft to fly safely through airspace heavily contaminated with ash. This frustrates passengers, who have then become stranded. The airline workers are frustrated, too, because planes need to fly to earn money. The passengers and the airline industry workers may suffer greatly (agonize) over the inability to have aircraft in the air because of volcanic ash. And we might see aviation agonyset in.
1.2 metric tons equals 1 cubic meter of Fly ash (one of the residues of coal combustion).
specific gravity of fly ash is 3.2
whenevr fly ash is disposed into ash pond(engineered structure) then it is termed as pond ash..Thus,pond ash is nothing but fly ash with a particular percentage of moisture.
1 kg. fly ash = ? cft.
The weight would be approx 32 ton-force (Imperial) or 9,800 Newtons (SI).
fly ash nothing but the coal
No. Fly ash is ash left over from burning coal. Pumice is a porous rock produce during some volcanic eruptions.
Fly ash is an ingredient in cement manufacturing. The main components of cement are limestone, clay, sand, and fly ash. The cement folks are interested in the silica and alumina in the fly ash, so depending upon the amount of those in the fly ash allows them to decrease the amount of clay and sand which is where they get those constituents if they don't use fly ash. The advantage is to decrease the volume of clay and sand that have to be mined, realizing a cost savings as well as saving the clay and sand for future generations.
jindal , nalco , etc metal mining companies utilize fly ash.
There are several health risks associated with fly ash. Two of the most common risks are pneumoconiosis and emphysema.
Robert H. Davis has written: 'Electron beam ionization for coal fly ash precipitators' -- subject(s): Fly ash, Coal ash
the ash affects the engines makin them fall