Want this question answered?
Depends on the waatage of the immersion heater. Read the name plate details of the heater - it shows the wattage of the heater. Assuming the wattage is 1KW (1000Watt) the KHW will be 1KHW if you use the heater for 1 hour.
1300/1500 watts
No it is not expensive
for a large one it is 4,000 watts and for a smaller one it is 1,000 watts
It uses 1150 watts, or 10 amps.
A ceramic heater uses the same amount as a regular heater. Most heater use 1500 watts so in one hour a 1500 watt home heater will use 12.5 amp hours.
An immersion heater is used to heat water for purposes such as bathing or showering. The amount of hot water produced depends on how long the heater is switched on for.
First you need to find out how many amps the heater draws. Then use this formula: Volts (220) X Amps = Watts Then take: Watts x 3.41214 = Btu/hr
I ASSUME the block heater in a 2006 Ford Freestar would use ( 600 watts ) like my Ford Explorer 4.0 liter V6 engine does
1150 watt, 10A
Find the block heater and look for the nameplate on it. It will be in watts. Use the following equation to find the amperage that it draws. Amps = Watts/Volts. The voltage to use for the truck will be 12 volts.
There are zero amps in 1000 watts. Watts are the product of amps x volts or I = W/E, watts divided by voltage. As you can see, that if no voltage is stated no amperage can be given. Once you find the voltage of the heater then use the following equation, Amps = Watts/Volts to find the current draw of the 1000 watt heater.