0
Aproximately 17.78 Sq Yds of asphalt @ 1" thick per ton. Aproximately 17.78 Sq Yds of asphalt @ 1" thick per ton.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What is the difference between cold mix asphalt and cutback asphalt?
Cold Mix Asphalt is a mixture of aggregate and asphalt. Cutback asphalt is a liquid asphalt. Cold Mix Asphalt is a mixture of Aggregate and Asphalt. The Asphalt is usually am emulsion asphalt or a cutback asphalt. An emulsion asphalt is asphalt cement blended with water. Cutback asphalt is asphalt cement blended with a fuel oil, kerosene, or a naptha. The water, fuel oil, kerosene or Naphta evaporates and leaves the asphalt.
How many yards are in 48ft?
16 yards
How many yards of concrete for a 35'x40'x4 slab?
17.3 cubic yards will do it.
How many yards is 105 meters?
105 m = 114.829 yrd
What is emulsified asphalt?
Asphalt must be liquified before it can be pumped through pipes, mixed with stone aggregates, or sprayed through nozzles. Heating is one way to liquify asphalt for construction purposes. But when asphalt cools, it becomes a semisolid material. There are other ways to liquify asphalt for construction operations. One way is to emulsify it with an emulsifying agent and water. In the emulsification process, warm asphalt is mechanically milled into very very small globules (5-10 microns and smaller) and dispersed into the water treated with emulsigying agent. The emulsifying agent keeps the asphalt globules apart from one another and suspended in the water which allows the asphalt to be used at room and cold temperatures. After the emulsified asphalt is sprayed onto a surface or mixed with aggregates the water evaporates and leaves only the asphalt residue behind to cement the aggregates together or waterproof the surface it was sprayed on.
How many sq yards will a ton of asphalt cover at 2 inches thick?
four
How many tons are in a yard of asphalt?
Asphalt installation is usually bid by the square yard, the installer will buy asphalt by the ton, and it will be delivered in a truck measured in cubic yards. Therefore, a volume/weight/area ratio is required. In short, an estimator will typically assume that one square yard of compacted asphalt laid one inch deep will weigh approximately 111 pounds.
How many yards is equal to three tons of asphalt?
The type of product measured does not change its weight requirement; a ton of feathers and a ton of asphalt all weigh: 2,000 pounds in American and 2,240 pounds in the United Kingdom; systems of measurement.
How many square feet in a ton of asphalt?
The amount of square feet in a ton of asphalt will depend on the thickness of the asphalt. If the asphalt is three inches thick it will have to cover the area three times. The type of asphalt used is also a factor towards weight.
How many square feet of asphalt does a ton cover at three inches thick cover at3 inches thick?
You have not said what substance you are using a ton of to cover the asphalt.
How many square feet of driveway covered one ton asphalt?
You needed to specify to what depth the asphalt is being laid.
Average per ton cost of asphalt?
$ 130.00usd per ton
How much does asphalt cost per ton?
250 per ton
How many cubic yards in 1 ton white crushed marble?
Something on the order of .6 yards per US ton
How many Square feet does 1 ton of asphalt cover?
This depends on many factors like the area of the pavement being covered and the thickness of the pavement. This question is very general and can have many answers. Here are some conversions to help figure out how many sq ft 1 ton of asphalt cover. 0.056 tons asphalt/ SY (1 in thick) and 9 sf/1 SY. using these conversions will yield an answer of 1 ton of asphalt (1 in thick) coverinig 160.7 sf
How many cubic yards in a ton of dirt?
There is about 2800lbs in 2 yards of top soil.
How many square yards in a ton of rip rap?
The answer would depend on the size of the ton - there are two weights for a ton.
