could be up to 500 different kinds of bacteria depending on where the fridge is an the frequency of use/ users
About 0.1 kW for a kitchen fridge.
A fridge runs about half the time with out opening the door. Opening the door many times a month might add about 30 hours to the regular run time of the fridge. 30 hours of running a fridge costs about .90 dollar. If you open the fridge about 10 times a day for a month that would mean you open the fridge 90 times. so each opening of the fridge probably costs about .001 dollars. or 1/10 of a penny. Its inserting very hot items or leaving the door open for a long time while deciding what to eat that will cost more. obviously refrigerators run less in the winter unless you heat your house irregularly high and they run more in the summer. And again the price will be a bit more for each door use in the summer as the temp escaping in to the fridge when you open it is hotter.
bacteria is everywhere in your water, in your body, on your food pretty much everywhere in the universe.
Yes, there is bacteria in prairies. A group of bacteria from phylum Verrucomicrobia seems to be especially abundant according to recent studies. There is still much to learn about the role of this bacteria.
There are many kinds of bacteria. Some bacteria is good for your body, and if you get rid of too much bacteria you can get a infection. [For example when you don't have enough bacteria in your vagina that's when you get a infection down there]. But you also can have problems if you have too much bacteria or a bad bacteria, it all depends on the type of bacteria.
24
how much does it cost to fix a door handle to a 2007 chevy colbalt Ls the inside cables inside handle and out side door handle
$30
No, the fridge puts as much heat out its back as it will put out the door.
This is because temperatures within the fridge are low and are it unsuitable for the growth of bacteria which makes milk go bad. Wherelse at room temperature the bacteria will be able to grow much faster causing the milk to go bad.
it is easier to open a door using the handle, opening from the hinges is much more difficult... FACT
Unplug it! Clean with a good disinfectant (Much cleaner than you would guess), put a spacer in the door to assure that it will not close. If the refridge. is very old and there is a latch handle for the door; remove the door entirely (so children can not get caught inside) If you are going to store for several years it would be better to call an A/C company to come and evacuate the gasses and then junk the refridge. The Refridge you get to replace it (if needed in the future) will be much more efficient.
It depends on how much fruits and veggies your family usually eats. If you eat a lot then you may want to purchase a fridge with two crisper drawers. If you eat a very small amount you may want to save some space and go with just one drawer.
there are two 10mm bolts, one on the outside rim of the door next to handle; the other is on the inside. to get to inside one you have to remove door panel and the inside door panel. There are several bolts there as well. The door handle bolt is kind of hidden but its behind the window rail remove it and the linkage clips after pulling the handle out of the door. it maybe easier to replace the door locking clip after reinserting handle back into door. And while your in there it is a good idea to lube everything with a dry lithium grease so dirt and crude don't build up on them as much and everything runs smooth. Good luck.
Auto parts stores sell themfor around $9
The door handle is held on by one Phillips screw. Remove it. Slide the door handle forward about 1/2 inch to release it. It will still be connected to the rod that opens the door. Behind the doorhandle where the handle connects to the rod is a white plastic retainer attached to the handle and clamped around the rod. Take a screwdriver and pry (it doesn't take much force) the white plastic retainer away from the handle. It will pop off of the rod and remain connected to the door handle. Lift the rod up. Installation is the reverse and easier once you see how it's made.
Changing the door handle isn't very difficult. Which is good considering the cheap plastic they made them out of. The standard procedure pretty much applies; 1) Remove the interior door trim panel 2) Disconnect the linkage attached do the door handle 3)Change the door handle 4)Re-assemble I don't remember the details of what scews / bolts have to be removed, but the whole job is pretty simple. The only variation is for whether it is an inside or outside handle, and really that only changes the linkage that you remove. I have changed both an inside and outside handle, on opposite doors of course... Didnt take me long at all.