You cannot weigh an area, but you can weigh a volume... so, one cubic meter of stainless steel weighs 7480 - 8000 kg. See related link for the source.
The standard weight of 24 gauge sheet steel ... notgalvanized, stainless,or aluminum ... is 1.000 lb per ft2 .
The answer depends on the material and quality of the carpet.
You cannot weigh an area. Just as you cannot weigh a distance. (How much does one centimeter weigh?)
It depends on the glass type, but for general purposes it is about 19.8 kilograms per square meter
The density of steel is 7850kg/m3 so a 1m2 of 1mm sheet would weigh 7850 x 0.001 = 7.85kg
8000 kg or 17636.98 lb mass
Steel and stainless steel tend to weigh around the same, however, stainless steel can sometimes be a bit lighter.
Stainless steel coffee makers will give you what their name states; a stainless coffee maker. The downside to stainless steel is that it is heavier than what plastic coffee makers would weigh.
It depends on the type of stainless. Different amounts of different alloys are used for different grades of stainless.
roughly 3.09996 pounds/SF
500 lbs. for type 304 SST.
Per the attached related link, the density (hence weight) of stainless is slightly more than the mild carbon steel. Using about 8.03/7.84 ratio of density, for the same volume of material the stainless will weigh 2.4 % more.
The standard weight of 24 gauge sheet steel ... notgalvanized, stainless,or aluminum ... is 1.000 lb per ft2 .
Sheet steel is 4.375 lb per feet squared; 4.531 lb per feet squared for galvanized steel; Stainless steel is 4.41 lb per square feet; and 1.140 lb per squared feet for aluminum.
It will vary depending on the style of stainless steel Bull Bar that you are choosing. If you are looking at a basic center piece Bull Bar it will weigh around 30-50 pounds. If, however, you are looking at a Bull Bar with a Brush Guard, it will weigh 100-110 pounds.
Depends, of course, on the density of the steel.
The Gateway Arch weighs 43000 tons, of which nine hundred tons is stainless steel.