0
My suggestion is not to buy fill dirt but to go to a local construction site and pick some up there. Waste dirt is usually left over from leveling the land to build. A foreman/site manager might just let you have all the dirt you would like.
Wiki User
∙ 13y ago
Wiki User
∙ 10y agoWe need to know "remove it" from what. Also what kind of "dirt", hard packed gravel, topsoils, sand etc.
Add your answer:
Earn +20 pts
How much does dirt cost by cubic ft?
1 penny for the earth
How much does 0.4 cubic feet weigh in pounds?
More info needed. How much does 0.4 cubic feet of what weigh? Air? Lead? Water? Dirt?
How much dirt is 18 tons?
36,000 pounds, aprox 20 cubic yds. 20 cubic yards spread out at 2 inches will cover 3200 square feet. hope that helps.
How much dirt is in a hole if the hole is 10 ft in width 5 ft long and 20 ft deep?
Theoretically, none. The amount of dirt excavated to create such a hole would be 1 cubic metre. However, excavated dirt (depending on the nature of the dirt) can increase in mass by up to a third the original size. That is why when you dig a big hole then fill it in (getting all the dirt back) the hole is raised on top not flat.
How much dirt can be removed from a hole that is 3 feet deep 2 feet wide and 10 feet long?
None, if you dug the hole, you emptied it of 162 square feet of dirt, so put it back.
How much does dirt cost by cubic ft?
1 penny for the earth
How much dirt in a cubic foot?
1,728 cubic inches of it
How much dirt to fill 10'x10'x3?
300 cubic feet of dirt
How much dirt is in a hole 2ft long 3ft wide and 2ft deep?
AnswerNothing.... (no dirt in a hole)Answer1800 lbsSize of hole = 3 x 3 x 2 = 18 cubic feet, x 100 lbs per cubic foot = 1800 lbsAnswerIf there is dirt in the hole, it would remove the hole, so there is no real answer to this. You could ask "If dirt is 100 lbs per cubic foot, what is the weight of 18 cubic feet?", to which the answer is 18*100=1800 lbs... Have fun!
How much dirt is needed to raise 1 acre by 8 inches?
29,040 cubic feet of dirt.
How much dirt is in a 3'x5'x2' hole?
30 cubic feet of dirt have been removed,and no dirt remains in the hole.
How much area does 1 cubic yard of dirt cover?
The answer will depend on the depth to which the dirt is spread.
How much dirt is in a hole 2ft by 3ft by 6 ft?
If the hole is a square then there is 36 cubic feet of dirt in the hole.
How much dirt is in a hole that measures 2 ft by 3 ft by 4 ft?
There's no dirt in a hole.
How much dirt to fill 8 foot x 16 foot x 10 inch?
8ft*6ft*10in 96in*72in*10in 960sqin*72in 69120 cubic inches of dirt or 5760 cubic feet of dirt.
How much dirt is in a hole 3'x5'x2'?
There would be no dirt in a hole, but the hole would fit 30 cubic feet.
How much does 0.4 cubic feet weigh in pounds?
More info needed. How much does 0.4 cubic feet of what weigh? Air? Lead? Water? Dirt?
