answersLogoWhite

0


Best Answer

$1,650

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How much much would the material cost for a 2000 sq ft asphalt driveway laid 2 inches thick?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How thick is asphalt in a driveway?

The base or foundation can be between 6 and 10 inches thick. Over that is laid the asphalt anywhere from 1.5" to 3" in thickness. The asphalt driveway needs to be sealed at least every three years, more often in severe weather climates.


How many square feet of asphalt does a ton cover at three inches thick cover at3 inches thick?

You have not said what substance you are using a ton of to cover the asphalt.


How thick should a concrete driveway be?

two and a quarter inches is desired for driveway for most domestic vehicles


How thick is a driveway slab has to be?

Concrete driveways are no less than 3.5 inches to 4.5 inches.


How thick should asphalt in residential driveway?

four inches minimum. depending on your climate zone, and freeze / thaw. six inches deep would be the preffered. the only need to go deeper would be for large heavy duty trucks, semi trucks....


How many sq yards will a ton of asphalt cover at 2 inches thick?

four


How many square feet in a ton of asphalt?

The amount of square feet in a ton of asphalt will depend on the thickness of the asphalt. If the asphalt is three inches thick it will have to cover the area three times. The type of asphalt used is also a factor towards weight.


How much asphalt for 20x20 at 2 inches thick?

That's 2.4691 cubic yards. (rounded)


If i have apply material 100 mil thick how thick is that in inches?

0.1 inch


How much asphalt do I need for 600 Square feet that is 4 inches thick?

You will need 200 cubic feet.


How many tons of asphalt is needed to cover up 200 square feet and 3 inches thick?

36 tonnes


A driveway is 162 feet long and 6 wide and 4 inches deephow many cubic feet of concrete will be required for the driveway?

Multiply length times width. IF your driveway was 1 foot thick that would be the number of cubic feet of concrete. HOWEVER- it is only 4 inches thick. That is .33 ft (one third of a foot). So take your answer you got from multiplying LxW, and divide by 3. That will be the number of cubic feet of the driveway's volume.