How much wood can a woodchuck chuck? Same question.
31000 - 35000 pounds
31000-35000 pounds
2000
How much propane can a propane truck hold
17000
80000
80000
Depends on the mass and what you are weighing. Gallons is a measure of 'capacity'. In a five gallon container you could put five gallons of water, which would weigh about 50lbs, but five gallons of petrol, which is lighter than water, would weigh less.
Get a dump truck, top off the fuel tank and weigh the truck at a truck stop. Then put the bricks in the truck, top the fuel tank off again, and reweigh the truck. Subtract the weight of the empty truck from the weight of the full truck, and you have the mass of the bricks. You COULD weigh every brick individually on a balance and add them all together, but that's really a pain. You could also weigh one brick, count the bricks in the pile and figure it mathematically...but really, a Bobcat and a trip to the local Petro will be much quicker.
Purging a propane cylinder is done by first removing air in cylinder that has never had propane in it. Then cylinder is is filled with propane vapor appx. 15psi this vapor is then blown out. This process is then repeated appx.4-5 times this removes all unflamable gas from cylinder and replaces it with propane vapor. If a new cylinder is not purged the propane will not burn properly.
A gallon of Liquid Propane Gas (LPG) weighs 4.23 lbs (source:wikipedia & yahoo!answers). Note that at "normal" temperatures (above it's natural boiling point of -40F) and pressures (propane is normally stored as a liquid by storing under pressures in the vicinity of 250-300psi), propane is a gas. As a gas, it's mass (or weight for most people living on Earth) is significantly less. Most "propane weight" discussions refer to LPG, but it's important to point out there is a difference in mass, therefore weight, between liquid propane and gaseous propane.
To determine the molar mass of propane (C3H8), add the atomic masses of all the atoms present: 3C = 3x12 = 36 8H = 8x1 = 8 Total = 36 + 8 = 44 g/mole = molar mass of propane
Delivery trucks come in many sizes and shapes. They also come with a sticker or a tag telling you the GVWR . This would be the gross vehicle weight rating (the weight of the truck, the passengers, cargo and a full tank of fuel).
The weight of a loaded UPS truck will depend quite a bit on the model. The average loaded weight of a newer model UPS truck is 19,500 pounds.
2856kg fully loaded or... 1800kg un-loaded or empty
A typical fully loaded concrete delivery truck can weigh up to 70,000 pounds (35 tons). An empty truck weighs between 20,000 and 30,000 pounds and a full load of 10 cubic yards of concrete weighs about 40,000 pounds. That said, concrete with 5 to 8% air entrainment for freeze/thaw protection will weigh proportionally less. In hilly terrain, trucks may be somewhat short loaded to prevent spillage during transit. Considering these and other small variations, total weights are approximate.
69,500 pounds
Typically 4-5 tons
8400-8800 lbs the "average" 2 door truck does not weigh 8,000lbs that might be its max loaded weight but
Depends on the size and duty level of the truck. Typically they are well over 26,000lb fully loaded.
Not enough info to answer that question. The year, make and model info needed.
truck (loaded) must not weigh over 25,999 pounds.
5kg
There is no one answer. Trucks come in various sizes and weights, and may be loaded with different weights. And to the prior answerer- a ton is not 1,000 pounds.