0
1 sq ft * 6 inches = 1 sq ft * 0.5 ft = 0.5 cubic feet.
1 sq ft * 6 inches = 1 sq ft * 0.5 ft = 0.5 cubic feet.
1 sq ft * 6 inches = 1 sq ft * 0.5 ft = 0.5 cubic feet.
1 sq ft * 6 inches = 1 sq ft * 0.5 ft = 0.5 cubic feet.
Wiki User
∙ 11y ago
Wiki User
∙ 11y ago1 sq ft * 6 inches = 1 sq ft * 0.5 ft = 0.5 cubic feet.
Add your answer:
Earn +20 pts
How much steel required in 1 square feet slab?
ju
How do you measure marble slab?
As it is a marble slab, it could be supposed that the shape is fairly regular. So multiplying length by width will give the square area of the slab. It could be that the square area is not required, and the length and width is needed simply to fit the marble slab into a recess or is to be used as a work-surface , etc. But, either way, a steel tape measure is usually required to measure the marble slab.
How many yards for a ten by ten slab?
0.3086 for every inch of thickness
Can a slab of thirty sq ft of cristal be made for a table top?
We had a table with a slab thirty square feet big and an inch thick. I wonder if it was cristal
How many square feet does one yard of cement cover?
It depends on the thickness of slab. A yard of cement contains 9 cubic feet. Thus, it would cover 9 square feet if the slab was 1 foot thick. For a 4 inch thick slab, it would cover 3 times as much area, or 27 square feet.
How much steel required in 1 square feet slab?
ju
How much steel required for square meter in roof slab?
for residential building 1 sqm steel required =8kgs
How much steel required for 1 square meter slab?
Please specify theGaugeor thickness
Minimum and maximum area of steel required in rcc slab as per BS code?
The minimum area of steel required in RCC slab as per BS code is 0.12 to 0.15% of total area. The maximum diameter of bar in slab, shall not exceed D/8, where D is the total thickness of slab.
How much concrete would you need for a slab 16x16x4?
At least 3 cubic yards for a 4-inch slab. You'll need 4.75 cubic yards for a 6-inch slab.
How much concrete you need for slab 10ft by 10ft by 4 inches thick?
1.25 cubic yards for a 4-inch slab. 2 cubic yards (1.85) for a 6-inch slab.
How can you calculate for 1 cubic concrete steel requirement for slab?
well , reinforcement steel required for slab is nearly 0.7 to 0.8% of the volume of concrete so if concrete is 1 cum then steel will be 1*0.7/100 =0.007 but density of steel is 7850 kg/ cum so 0.007*7850=54.95 say 55 kg per cum so steel required to reinforce 1 cum concrete for slab is approximately 55 kgs.
What is concealed beam How can you convert 12 inch x24 inch beam into 8 inch depth beam?
this a type of beam which contain the depth of slab in its depth. and if you want to decrease the depth of beam then just design it again reducing the depth from 12 inch to 8 inch it will change the required area of steel and grade of concrete. thats it
How much weight 4inches slab hold per square foot?
The answer will depend on 4 inch slab of what material!
What is the minimum of flate slab design?
Since most flat slabs contain reinforcing steel, the minimum would be the thickness required to cover the steel, generally 2" top and bottom. But the real answer depends on what the slab is supporting and the level of safety required. For a very general situation where the slab is supported on all sides and not significantly longer in one direction, a slab can be 6" wide and support light loading if properly reinforced.
How much concrete do you need for a16ft by 6ft slab?
For a 4-inch thick slab you will need at least 1.2 cubic yards.
How much kg steel bars used for RCC slab of size 50' 18' 4.5?
About 2.27 kg of steel bars is used for the RCC slab of size 50' 18' 4.5.
