Hi this is Tilman McClendon I own Claim Pro a Insurance Restoration Company, from my own experience with numerous insurance companies anywhere from $17.50 to $28.50 of course the higher is premium pay from the insurance companies .Remember this is tear off only!!!!
255
usually 1.00 a square ft, but they should haul away also
Conditions, materials, and worksite will vary, but for a non tear-off, asphalt shingle roof with a few valleys and a pitch under 6/12, a labor charge of $75-$90 per square for non-metro Midwest application is in the ballpark.
One layer may be covered. If you have two layers on the roof already, you will have to tear off.
beer, steer, spear,gear, mear, leer, clear
Here's what I can help you with: 3 roofing squares means 300 square feet (1 square = 100 feet). On a regular basis, one square is covered by 3 bundles of shingles. Roofing felt (1F) is usually supplied in rolls (30 ' of length), with one side covered with sand or synthetic granules. Be aware that there are two kind of felt impregnations: bituminous and tar - there is a distinction between these two. If I were you, I would surely look (and go) for the newest waterproofing membranes, lot more less prone to puncture and tear. I hope this helped. Succes!
do you mean tear as in tair, or tear as in teer?? In tear as in tair, a bandage might help. In tear as in teer, i recomend wiping your eye with a tissue, but not too much, or your eyes will go red
i think it is vary from $25 to $80.standard 3tab shingle is 36" long.
you measure one side and divide by amount needed then cut/tear.
50
bare chair stare clair lair pear tear bear bare
That probably refers to the layer of roofing felt(paper) that lies between the roof sheathing(plywood) and the shingles..a fallen limb could tear thru that "membrane" and rain could become an issue