I assume you mean 1 and 3/4 inches in diameter. Therefore your cross-sectional area of your hose is pi/4*diameter. You can either leave your diameter in inches or convert it to feet. If you choose to leave you number in inches then you convert 100 ft to 1200 in and multiple 1200*cross-sectional area to get the cubic inches water in the hose. If you choose to convert your diameter to feet then just multiply 100 ft times cross-sectional area to get the cubic ft of water in the hose.
56548.8 cubic inches = pi (3.1416) times the radius squared times the height
A cylinder 50 feet in height and 6 inches in diameter can hold up to 73.44 gallons of water.
U tell me
It would contain about 10895.04 cubic inches, which according to a converter i use assuming you mean united states liquid gallons, is 47.1646 gallons, that is slightly off as there was a decimal to the cubic inches. If you want to do it yourself it is (17/2) squared times pi times 48 to get cubic inches, then find an online website, ect. to convert it to gallons.
This is kind of tricky, but here are the basics: Volume is the surface area of the cylinder multiplied by the depth of the water. Do not mix feet and inches, convert all dimensions to feet or inches, depending on the application. To calculate the surface area, measure the inside diameter of the cylinder, divide the diameter by 2 and then multiply by Pi (3.1416). Multiply the surface area by the depth of the water and use following information for conversion: water is 231 cubic inches per gallon or 7.481 gallons per cubic foot.
56548.8 cubic inches = pi (3.1416) times the radius squared times the height
Diameter is a length measurement. Cubic inches is a volume measurement. Diameter cannot be measured in or converted to cubic inches.
8.15 gallons
A cylinder with a diameter of 19 inches and a height of 12 inches can hold up to 14.73 gallons of water.
489.76 gallons of water.
A cylinder 50 feet in height and 6 inches in diameter can hold up to 73.44 gallons of water.
Assuming that you are asking about the 1 inch diameter pipe that you would find at the hardware store, the average inside diameter of Sch 40 is 1.029". The formula for volume of a cylinder is pi times radius squared times height. Pi = 3.14, the radius would be half the diameter (1.029/2) = .5145 the height is 12 inches 3.14 x .2647 x 12 = 9.974 cu inches
74.42 gallons.
It can grow to be 6 to 12 inches in diameter
Generally, hot water pipe diameters are 22mm or 0.866 inches
The volume is the product of height multiplied times the area of the base, assuming the container is a right cylinder. Area of base = radius times radius times pi, or 18 times 18 times 3.14, or 1018 square inches. Multiply times the height, 36 inches, to get a volume of 36,644 cubic inches. Conversion to customary units of volume: 36644 cubic inches = 158.6 gallons (the start of a great beer party!)
If 24 inches is the diameter, there are 141,004 gallons of water. If 24 inches is the radius, there are 564,018 gallons of water.