We're not sure exactly what "24 foot round" means. We're going to assume
that it's a 24-ft diameter.
Volume = (pi) R2 D = (pi) (12)2 (4.5) = 2,035.75 cubic feet = 15,228.5 gallons
That's the volume of the pool, from the bottom up to the rim.
We have no way of knowing how much water is in it.
50,000
If the pond is uniformly 6-feet deep it would contain about 1,955,109 gallons of water.
A 25-acre pond that is uniformly 6 feet deep will hold about 48,877,714 gallons of water.
This is such an old one! Of course, there is no dirt in it because if there were, then there would be no hole!
3697 Gallons @ 80% of wall height
deep valley i think :)
6015.77 gallons
if it's 4 ft deep 21,139.948 gal.
142794 Pounds if it is 4 ft deep 107230 if it is 3 ft deep.
There are 6016.20 gallons of water for every 1 foot of heigth. Therefore, the total gallons is 24,065gallons. Hope this helps. Louis Daigle
18,506 U.S. gallons
Size: 15' Length x 48" HeightWater Capacity: 4,440 gallons (16,806 L) at 90% full
Approximately 20016.7 liters
319.2 gallons for every inch the water in it is deep.
There are 13,536 gallons in a 24 foot diameter pool that has 4 feet of water. Not true for a pool that is 4 feet in height. This would hold less than 4 feet of water.
Ground water is naturally pure and is a reliable source of water. Ground water is every where and it just depends how deep it is.
The water table is the term for how deep underground you have to dig to find ground water.
The calculation will depend on how deep in the ground the submersible pump is installed and where the outlet for the water is e.g. is it above ground. Speak to the company that installed the pump to see if they can provide you with that data.