answersLogoWhite
Home Improvement
Building and Carpentry
Flooring

How often should carpeting be replaced for health purposes?

789

Top Answer
User Avatar
Wiki User
Answered
2007-12-13 15:28:08
2007-12-13 15:28:08

For allergy or general cleanliness health concerns the carpet should be replaced with a hard surface like wood or tile.

001
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


According to the Los Angeles Housing Department, LAHD carpeting should be replaced every 7 years.


no. spaghetti sauce should always be fresh for health purposes.


Yes, if the padding is worn out or about to be worn out. Other wise if the padding is still in good shape then just leave it and add the new carpet over it.


The bathroom floor should be of a slip-resistant material surface, whether it be tile, stone, vinyl, or carpeting.


Pink, and you should not change carpeting or walls anywhere in the house but your room.



They are replaced when they go bad.


the ministry of health along with other actors in the health sector should plan the health system.


It was a factory option. It should be replaced when dirty.


You should have your rotors checked and possibly turned or replaced as necessary You should have your rotors checked and possibly turned or replaced as necessary


for conservation purposes.


Generally, you should avoid putting water in your car, unless it is in a sealed container. It can damage the carpeting, wiring, and lead to mold.


Your should always aim for excellent health.



should be in left side of trunk behind the carpeting in the fender well


The timing belt should be replaced every 100,000 miles.


no you should not tell your husbands mom about his health


It is not repairable and should be replaced.



Bare with me because I am trying to remember this from memory. If you open your trunk and look on the inside next to the light being replaced, you should see three black protectors which probably appear to hold up the trunk carpeting interior. Remove these protectors and pull back the carpeting (held on by velcro attachments). You should now see three bolts with retaining nuts. Remove the nuts with a deep 10mm socket and pull the light from the body from the outside of the car. After the light is out, you will see three light sockets. The brake light should be the most inner light. Twist the socket towards the left and the light should easily come out. Remove the bulb and replace it with the exact same bulb. The bulb has two filaments, one for the park lights and the other for the brake lights. After you've replaced the bulb, installation is the reverse of removal. Bare with me because I am trying to remember this from memory. If you open your trunk and look on the inside next to the light being replaced, you should see three black protectors which probably appear to hold up the trunk carpeting interior. Remove these protectors and pull back the carpeting (held on by velcro attachments). You should now see three bolts with retaining nuts. Remove the nuts with a deep 10mm socket and pull the light from the body from the outside of the car. After the light is out, you will see three light sockets. The brake light should be the most inner light. Twist the socket towards the left and the light should easily come out. Remove the bulb and replace it with the exact same bulb. The bulb has two filaments, one for the park lights and the other for the brake lights. After you've replaced the bulb, installation is the reverse of removal. Bare with me because I am trying to remember this from memory. If you open your trunk and look on the inside next to the light being replaced, you should see three black protectors which probably appear to hold up the trunk carpeting interior. Remove these protectors and pull back the carpeting (held on by velcro attachments). You should now see three bolts with retaining nuts. Remove the nuts with a deep 10mm socket and pull the light from the body from the outside of the car. After the light is out, you will see three light sockets. The brake light should be the most inner light. Twist the socket towards the left and the light should easily come out. Remove the bulb and replace it with the exact same bulb. The bulb has two filaments, one for the park lights and the other for the brake lights. After you've replaced the bulb, installation is the reverse of removal.


Ammonia is often mixed with methanol and water for industrial purposes. However, the mixture should be handled carefully as it is highly toxic, corrosive, and can cause long lasting health problems.


health care should be marketed to patients?


the manufacture reccomends it be replaced in 90,000 miles



maybe amended but not be replaced, as we are not changing the form of government



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.