Brake Pads and Rotors
Chevy S-10
Ford Expedition XLT
Ford F-150
How To

How to check front brake pads on Chevy s10 truck 1997 model?

161718

Top Answer
User Avatar
Wiki User
2005-09-11 15:58:44
2005-09-11 15:58:44

Look at the pads and measure the thickness. The minimum allowed thickness for the brakes pads is 2 mm. Replace if they are worn to this point. You will have to remove the wheel to measure the pads.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

All years of the Chevy Celebrity model are front wheel drive.

User Avatar

Year, make and model of vehicle would help along with front brake, rear brake or e-brake information.

User Avatar

That's easy... it's all in your mind, the last Chevy prizm model year was 2002

User Avatar

Front Brake Rotors can be a pain, I would recommend going to your local Pepboys, Kragen, O' Reilly's or AutoZone Near you. They will need your year and model of vehicle.

User Avatar

Why not just remove the bad bulb and look see what model it is?

User Avatar

More than likely a front or rear brake rotor is out of round. Depending on what model and year vehicle it could be a brake drum out of round also.

User Avatar

behind the panel right in front of the throttle pedal

User Avatar

The 2003 model has different caliper assembly for the brake system of the vehicle. If your Caravan has drum rear brakes, it uses TRW brake calipers. If you have disc rotors in the rear then the front will have "Continental Teves" calipers (Haynes 9-3).

User Avatar

If you mean a brake pad - its an easy job that costs about $15-$30 to do yourself, or you can pay someone $100 to do it for you.

User Avatar

It depends on model and year of production. If you have front and rear disk brakes, you need 8 pads (4 front and 4 rear): 2 per each wheel. If you have only front disk brakes and rear drum brakes. You will need 4 front pads and 4 rear brake shoes.

User Avatar

you can check the recall at www.autoweb.com. all you have to do is put in your vehicles information...make model year.

User Avatar

I need to know which year and model and whether it is a front or rear turn signal.

User Avatar

Depending on the exact model, you may have a few things to remove in front of it. When front is clear then remove the brake master cylinder then the booster. A lot of awkward wrench work can be made easier if you have a good socket set with universal joints.

User Avatar

Fuse block locations vary from model to model. Ask again specifying the model of your Chevy.

User Avatar

You did not have to apply the brake on a 91 model to shift it. There's nothing wrong.

User Avatar

that's sounds like a futuristic model...how exactly did you acquire a van from the 201st century?

User Avatar

That depends on the year, make, model of vehicle which you did not include. Please ask a new question and more info.

User Avatar

I don't know what model year you own, but on my 09, it says that the clutch system is does not have its own fluid, but is tied into the brake system and its fluid. That makes sense to me, seeing that clutch fluid is merely brake fluid.

User Avatar

A mystery to me. Don't want to break anything but cannot figure out the fasteners.

User Avatar

There are several different front brake calipers for the Saab 900 depending on the year. The first is from 1979-1987 and is the same as that on the Saab 99 beginning in 1975. You need a special tool to rotate the caliper piston back into place because the front caliper also acts as the parking brake. From 1988 thru 1993, the front calipers on the Classic 900 are the same as those on the Saab 9000. The NG 900 has a completely different brake caliper setup beginning with the 1994 model.

User Avatar

Check bulbs Check stop light switch Also make sure you have the right bulbs model 2057 bulbs.

User Avatar

Brake caliper repair kits are prepackaged parts for either the front or rear bake system in regards to your unique make and model of automobile. The brake caliper houses the brake pads and are fitted over the rotor in the brake system. When these housings need to be replaced, a kit for this repair is the most convenient way to reestablish a properly maintained brake system.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.