How to fit 20inch rims on 1993 cutlass supreme sl?
yes you have to get a low profile tire on it
bolt pattern for cheap rims
'would the bolt pattern for rims on an 1986 cutlass supreme be the same as on a 1992-'97 front wheel drive cutlass?
No there rear wheel drive rims are different than front drive rims
You can put 22 inch rims on a 1978 Cutlass Supreme as long as the bolt pattern matches. If the bolt pattern matches, you can put any size tire on your vehicle.
with the proper lift and tires
yes you do .we are putting a 5inch lift on a cutlass and it has 22s.
215/60r16 if your stock rims are 16"
Yes u will need spacers to raise it up some
7 inch lift kit
Yes, 20inch rims will definitely fit, no adapters or accessories needed.
i dont know tell me
tirerack only offers up to 18" with stock lift and spacers
As long as the bolt pattern is the same and the spacing is the same (4.75") you can swap rims. If you have 14" steel rims you can put 15 or 16" Aluminum rims on but do all 4 other wise the speedo will be off. Also front wheel drive wheels are not the same as rear wheel drive. So put the right ones on.
No! a 1987 cutlass is rear wheel drive, the van is front wheel drive....wrong offset.
you need to get a lift kit yu kan get one 4 like $90 just go to to yahoo and search lift kit for cutlass supreme and what year it is
20's-24 that should do it i have 23's on mine after i got it lifted
Yes you can fit 20" rims on you 1979 cutlass, if you wanted to you could fit 22" rims with low profile tires with the stock springs.
I've seen '97 Altimas with 20inch rims on them. You will need to buy rims that need the same number of lug nuts your current ones have.
4 inch body lift or 6 inch frame lift
Easy answer to this. Don't put them on stupid cause if you are having this kind of problem they are to big.
Probely but to make shure you shuld just lift it to make look cool and more styleish
a 1982 cutlass and a caprice do. the Cutlass likely has 14 inch rims and the Caprice 15's but they work
Yes they will. They will fit perfectly if you get the low profile tires
Yes, of course 20inch rims will fit on a 05 Taurus with no problems. 225/35/20 tires or simliar sizes. rims 20x7 or 20x 7.5
Texas edition adds a 5.3L, G80 locking rear diff, 20inch rims, towing package, and the Texas badges in and out.
Yes, but 1991 rims will NOT fit a 1993 camaro
please make them fit
It depends on the year of your car. but in general, rims from 14-15 to 20" will probably fit your car.
15" lift for no cut no rub full u-turn, but you can fit them with a 7" lift go to universalcarlifts.com for more info
Not unless you put on a air suspension.
will 22 inch rims fit a 1993 caprice Chevy
No only 20 inch rims fit in a 1993 Acura Legend
I doubt it very much.
no thay will fit a 1998 and up
You don't need a lift kit to fit 20inch rims on a Malibu. Just get 225/35/20 Tires an you'll be good to go ( that's what I have on my Malibu), no rub or anything. 245's will rub.
All Cadillac deville and Fleetwood rims from 1985 to 1993
The standard rims on a 1993 Toyota Camry are 14", but if you have the sport package (with a V6 engine) you will have 15" rims.
yes although you can i think its better to put 20inch rims instead cause you will have more tires then is you would to put 22inchs,, to put 22inch rims you will need to have them very low profile. i have 22inch rims that i bought for my tb and they are still unsinstalled. the tires are 285/30/ZR22 dunlops. if you put 35 instead of 30s the tires will touch the underbody of the front… Read More
Yes. Just have to get Wheels for those rims.
Yes they will fit, I have a 2001 Malibu and i have 225/35/20 tires on my 20" rims.That is the biggest tire size that you can squeez under the struts.
They will fit, but they will look stupid as hell. Keep in mind the 1972 Cutlass came stock with 14" or 15" wheels. Anything bigger than 18" tends to look really, REALLY stupid on older cars like the '72 Cutlass.
as big as u want as long as u jack up the car and get custom made rims
IF YOU HAVE THE RIGHT BACK SPACING IT WILL FIT, OTHER WISE IT WILL BE TIGHT
40" was the biggest. Now it's 50" - see here http://www.examiner.com/x-4824-Tampa-Sports-Car-Examiner~y2010m1d27-Biggest-rims-in-the-world-Cutlass-on-50s
you can use a long nose needle nose pliars and take your time they are about impossible to find
23" rims would not only look bad but the wheel wells on a 1993 Camry are too small to support a rim that large once you add tires.
youll need to raise it unless you want to cut the wheel well, or destroy the control arms
Yes they will work as long as you run 245-35 series tires.
Not directly, no.
Honestly it depends on your tire size. But more than likely they will scrub and you will need that extra clearance. So, I'd either get a.) a body lift or b.) truck springs for the front and air shocks in the back