Radiators
Buick LeSabre
Nissan Pathfinder
How To

How to flush radiator coolant on 1997 Buick LeSabre?

474849

Top Answer
User Avatar
Wiki User
2011-11-24 08:22:28
2011-11-24 08:22:28

dont!! just use cool clear garden hose water. then replace with coolant mix.

Thereis a thumb-nut on the engine side, lower rightside ( when standing in front of the car facing the engine) Stuff will get everywhere

Really? No one had a problem with the above being passed off as an answer? Please. Keep your opinions to yourself children. 1. If you wish to flush your radiator and cooling system, familiarize yourself with your vehicle by asking a mechanic or two, and getting a repair manual, such as a Haynes manual. 2. If you have any doubt in your confidence to approach the problem on your own, you should take your vehicle to a licensed repair shop for the flush, most oil change shops offer this service 3. Please disregard the "answer" about hose water. First, unless your homes pipes are completely screwed, the water from a garden hose should always be clear. Two, the real issue the man child who originally posted neglected to mention is that "clear hose water" typically has dissolved solids that are invisible such as calcium (the white scum on your shower head nozzle, that is, if you shower) and you do not want these minerals to form deposits in your cooling system. So.... Every guide says to - - USE DISTILLED WATER ONLY!- That and most flush kits feature complete directions. - this post helpfully edited by a concerned Internet citizen who is sick to death of low double digit IQs, opinionated 12 going on 40 year olds, and mentally incapable, inexcusable wastes of oxygen found online these days, spewing out useless opinion, drivel, and crap. Ignore these people and let evolution do its job to clean up our gene pool, please. Have a nice day.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

The flush valve for the radiator on a 1999 Buick Century is located on the bottom of the radiator near the vehicle's frame. When it is loosened, the coolant will slowly drain from the vehicle.

User Avatar

total coolant capacity of 3.8L buick regal custom? doing a radiator flush so i need to know how much coolant to buy

User Avatar

The radiator on a 98 Buick Century is flushed by turning the petcock to drain the coolant. Water is then flushed through the system until all contaminants are removed.

User Avatar

To actually "flush" the coolant in this vehicle you will need a flush machine. To do that we did at the dealership, drain the radiator (you need a 1/4 inch ratchet and 1 inch extension) then use a vacuum fill too to fill with new coolant.

User Avatar

There are flush-and-fill kits that Prestone makes. It might be more efficient to have it done professionally. I think the cap used on the coolant tank acts as the radiator cap since it mentions the pounds of pressure on the label.

User Avatar

One flushes a radiator by draining the radiator, rincing the radiator, and then by adding a new coolant. One should remember that the drained coolant is toxic.

User Avatar

The radiator on a 1995 Saturn is flushed by draining the coolant, refilling the engine with water, and adding a flush. It is allowed to circulate and drain before refilling with coolant.

User Avatar

It would be best to disconnect the coolant lines and flush the core after the radiator flush. This will clear any sediment from the core.

User Avatar

Get a flush kit at auto parts comes with adapters and instructions

User Avatar

Rust, It is time for a coolant flush.

User Avatar

Drain and properly dispose (recycle) the old coolant. Put one bottle of Radiator Flush(from am auto parts store)in the radiator and refill with water. Run the car a idle(leave the heater ON to flush the heater core)for approx. 5 minutes. Drain and properly dispose of the flush liquid. Refill radiator with 50/50 mix of coolant and water or all premixed coolant.

User Avatar

You still need to flush the engine block and heater core.

User Avatar

Coolant is flushed from the radiator of a 1997 Honda Accord by opening the petcock and allowing the system to drain. The petcock is then closed, the system filled with water, and a flush added to the radiator to cleanse the system.

User Avatar

open the petcock drain. remove the radiator cap and fill the radiator with water, the fresh water will push out the old coolant and flush the system. Catch the old coolant inn a container as it is poison to animals.

User Avatar

please help me. i want video how to flush the coolant of renault clio

User Avatar

flush it dissconect both hoses and lfush it out good then refill with coolant flush it dissconect both hoses and lfush it out good then refill with coolant

User Avatar

Replace radiator ASAP. And flush tranny fluid.

User Avatar

The radiator on a 1999 Mercury Cougar is flushed by draining the radiator, filling it with water, and adding a commercially available radiator flush. The engine is allowed to circulate for 10 minutes, drained, flushed with fresh water, and refilled with coolant.

User Avatar

radiator core could be plugged, cap on the coolant reservoir is not maintaining proper pressure. is water pump working properly!! I would flush system and see if this works, buy a good radiator flush at any auto parts place. you can flush the radiator by adding flush to coolant tank, then put a garden hose in tank and back flush it. as long as you have a new thermostat in, you do not need to take it out!! flush until the radiator is clear. when done add new coolant. I did this to mine when changing intake manifold gasket. and it does not over heat it is fine!! HOPE THIS HELPS YA OUT.

User Avatar

Sounds like you need a radiator coolant flush or you need a bigger radiator for your vehicular transport thingy.

User Avatar

You can always go to walmart or try an autoparts store and get a coolant flush kit which has all the fittings to fit onto the radiator and connect a water hose to it Also some transmission flush. should have directions with it.

User Avatar

Remove the bottom hose from your 1995 Chevy Corvette radiator. Allow the coolant to drain out. Put a hose into the top of the radiator. Run water through the radiator until it runs clear.

User Avatar

Purchase a flush kit and new coolant from your local auto parts store and follow the directions in the kit.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.