0
Struts can be a very dangerous I would recomend you take your vehicle to a worthy mechanic. If you have the right tools to where you can compress the coil springs than it is a relatively easy job.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Replace struts on 2003 town and country?
You will need to compress the strut spring with a spring compressor. When the strut spring is compressed remove the strut retaining bolts. There is a strut retaining bolt on the top and the bottom of the strut assembly. Reverse the process to install the new strut.
How do you change struts on a Ford Escort Zx2?
Compress the strut spring with a spring compressor. Remove the retaining bolts from the top and bottom of the strut. Remove the strut assembly. Reverse the process to install the new strut.
How To Replace VW Golf Hatch Strut?
Begin by compressing the strut spring with a spring compressor. Be very careful as the strut spring will be under hundreds of pounds of pressure. Remove the strut retaining bolts. Reverse the process to install your new strut.
How do you change a strut mount on a Mitsubishi montero?
The bottom strut mount is connected to the frame by two retaining bolts. Remove the retaining bolts to remove the strut mount. Reverse the process to install the new strut mount.
How do you replace struts on your Chevrolet Celebrity 2.8 L?
Begin by compressing the strut spring with a spring compressor. Remove the strut retaining bolts. Reverse the process to install the new strut.
How do you change the front coil springs on a Honda accord?
Use a strut spring compressor to compress the old spring, the remove the strut from the spring. Use the compressor to put the strut into the new spring. Install the strut and spring into the vehicle.
How do you replace a rear shocks on a 2000 buick century?
Your vehicle is equipped with struts. Answer Provided By Freeautomechanic.com == To Remove: # Remove the three upper strut-to-body mounting nuts. # Raise and safely support the vehicle. # Remove the rear tire and wheel. # Disconnect the stabilizer bar link from the strut. # Scribe the strut to the knuckle so it can be installed in the original position. # Support the knuckle and hub and then remove the strut to knuckle bolts. # Remove the strut from the vehicle. To Install: Rear strut assembly removal/installation # Position the strut on the rear suspension. # Install the strut to knuckle bolts. Tighten the bolts to 90 lb ft (122 Nm). # Connect the stabilizer bar link to the strut. # Install the tire and wheel assembly. # Install the three upper strut mounting nuts. Tighten the nuts to 30 lb ft (41 Nm). # Lower the vehicle. # Check and adjust the rear wheel alignment if necessary.
How do you change the front drivers side strut on a 2002 Pontiac Grand Am?
You will need to compress the 2002 Pontiac Grand Am strut spring with a spring compressor. Remove the top and bottom strut retaining bolts. Reverse the process to install the new strut.
How do you replace struts on 2002 Ford Explorer?
The strut spring with a spring compressor. Be very careful as the strut spring will be under several hundred pounds of pressure. Remove the top and bottom strut retaining bolts. Reverse the process to install the new strut.
How do you install a front strut bar on a 2001 gtp?
If the Strut Bar is a GM Performance Parts Strut Bar then you have to purchase a set of end brackets. The same front strut bar can be mounted to the rear with a set of rear strut brackets. http://drcustomparts.com/HomePage.htm More info at w-body.com
How do you replace strut arm bushings 1996v6fordthunderbird?
Requires a hydraulic press to remove and install.
How do you install loaded rear strut 2003 Taurus?
We need to know, car or wagon.
