answersLogoWhite
Nissan Maxima
Ford Windstar SEL
Ford Expedition Eddie Bauer
Ford Expedition XLT
How To

How to program 1996 maxima keyless entry remote?

434445

Top Answer
User Avatar
Wiki User
2015-07-16 18:17:28
2015-07-16 18:17:28

Try this it works for the 95 and some 96's Step 1) is to hit the lock button on the drivers door switch.(make sure door and windows are all shut. To program the remote you must insert the key into the ignition 6 to 8 times rapidly. The hazards lights will then illuminate and then you must hit the lock button on the remote. there is a slight delay but only hit the button once. keep repeating till it works.

1

Related Questions

User Avatar

how do you program keyless entry remote 98 GMC

User Avatar

How do you program a keyless entry remote for a 2005 KIA Amanti? Kent

User Avatar

How to program a keyless entry remote for 2008 pontiac g5

User Avatar

how to programm keyless entry remote for 2005 kia spectra5

User Avatar

The 1989 Buick Park Avenue does not come with a remote keyless entry. The keyless remote entry was not available till 1997.

User Avatar

It will depend on the make and model of the car. They do this so one can make a copy of the automated keyless entry remote.

User Avatar

How program my keyless entry remotes for 2003 chevy malibu

User Avatar

how can i program a remote for a 04 kia spectra

User Avatar

how do you program a keyless entry remote to a 2000 Pontiac grandprix programyourremote.com (program your remote.com)

User Avatar

A keyless entry remote on a 2001 Toyota Sequoia can not be reprogrammed at home. The key must be taken to a dealership where the engineers can program it with new settings.

User Avatar

On the inside of the keyless entry remote or sometimes on the back it explains how to do this. I believe you hold the unlock button along with the lock button for 7 seconds near the car. It will explain it on the inside of the keyless entry remote.

User Avatar

In order to program a VW Gold 2002 keyless entry, you would need the metal key flip, keyless entry remote and the immobilizer chip. Once you program the three components, you would have to program the immobilizer chip separately.?æ

User Avatar

You can program the keyless entry remote, for your 2001 Saturn L200, by holding the unlock and lock weapons at the same time. The red light will flash on and off. The remote will be programmed when the red light stays illuminated.

User Avatar

Check out this site www.programyourremote.com .....

User Avatar

check in your owners manual if you have it.

User Avatar

http://www.autotalk.com/how-to/honda-element/honda-element-03-04-keyless-remote-programming-instructions.html

User Avatar

I am pretty positive that only a Chevy dealer can program the remote keyless entry device for you.

User Avatar

You can't program the keyless entry remote for the Dodge 2500 yourself. You have to have it done at a Dodge Dealership. The cost is around $75.

User Avatar

I found an Internet site which says how to program the keyless entry remote. But there is an error: this procedure is good for Elantra 2001 to 2003. Elantra 2004 must be programmed by the dealer. http://car.justanswer.com/hyundai/n1kw-program-remote-entry-hyundai-2004


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.