answersLogoWhite
notificationBell
Car Starting Problems
Electric Windows
Chevy Silverado
BMW 3-Series
How To

How to put drivers side power window back on track?


Top Answer
User Avatar
Wiki User
Answered 2011-10-13 01:49:49

you cannot put the window "back on track" the window regulator failed and will need to be replaced, good luck.

What kind of lame answer is that? Yours might have been - not everybodies is.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Related Questions


To set the power window back on track in a Ford Focus, you have to remove the door panel. Once you get in there, you will see the track that you will need to put the window back on.


Remove the inside door panel. The entire power window mechanism will be visible. Put the window back onto the window track.


Remove the drivers side inside door panel. Remove the retaining clips from the window track. Place the new window in the window track and tighten the retaining clips.


You will need to remove the inside door panel of your Chevrolet Blazer. Remove the window retaining clips. Put the window back into the window track. Tighten the window retaining clips.


To put a driver's side window back on track on a Ford Expedition you will have to reseat the window. Do this by removing the door panel and putting the window back in place. You can use silicone or Gorilla glue to attach the window. Leave the window in the up position for at least one day once you have it back on place.


Remove the inside door panel of your 1999 Chrysler Intrepid. Remove the window retaining clips. Put the window back into the window track. Secure the window with the window retaining clips.



When a window goes off track on a 2004 Grand Am GT, the door panel has to be removed. The cable for the window is then reset on the track or repaired and the door panel put back on.


Begin by removing the inside door panel of your Kia. Remove the window track retaining clips. Put the window back on the window track. Secure the window with new window track retaining clips.


If your window has come off its roller you will probably need a new regulator to get it back on the track. Alternatively you can try to fix it by detaching the paneling on your door and trying to get window back on roller.


how to put a power window back on track on a 1991 ford f150


Take the door panel off and put it back on the track


probably have broken part in window assy. that is covered by recall. take it to the dealer.


dissasemble the door by removing the door panel. You unbolt the window regulator and or window to reposition window or regulator to get it back on track. Most of the time something bends or breaks to cause a window to get off track.


If a power window goes off track on a 1999 Camaro, the door panel can be removed and the window put back on the cable track. The door panel can be removed by opening the clips on the corners. If there are lights in the door panel, the light covers need to be removed first.


First, you must take off the inner door panel, then you have to loosen up one of the tracks that the window rides on and put it back in place. Then just tighten up the track, and you should be fine.


Remove the door panel. Find the track, for the passage window, loosen the track and put the glass, back in track. Put the track, back in track, and tighten it down. Put your door panel back on, and your ready to go.


Remove the inside door panel. The entire window mechanism will be visible. Put the window back onto the window track.


How do I put the window back on track of a 2000 jaguar type s


Has the power window lock switch on the drivers door armrest been switched on ?


To put a window back on track in a 1996 Geo Metro, the door panel will have to be removed. Use a screwdriver to pry up the clips around the door panel. Then locate the window cable and rewind it. If the window is operated by a power switch, be careful not to pinch the fingers when rewinding the cable.


If the driver's door window does not roll all the way up on a 2002 Focus SVT, perhaps the window has come off the track inside the door. The door panel has to be removed and the window cable repaired and put back on the track.


Possibly the front edge has come out of the track. Are you sure it is in the middle of the channel? Power or manual doesn't matter. If power, the motor may be getting weak. The drivers window gets more use than the other ones. If it's the track, take the door panal off and there should be a bolt or screw at the bottom of the door that will let you adjust the track. You may need to bend the bracket to get it aligned. Spray the track on the bottom of the window and any pivot points with WD40 or something similar while you have the chance.


Generic Answer You need to remove the door trim. Then loosen the track, you should then be able to re locate the window into the track


Take the outer door panel off then unbolt the old window from the track then place the new window in the track this will take sometime because the new window has to go in at an angle before you place the new window in the track make sure the track is at the bottom of the door use your hand tp place the window all the way down in the door then bring the window all the way up holding it with one hand at the bottom of the window you need to put the window all the way to the bottom first to make sure the window clips aline in the window track. roll the bottom of the track up intill you can bolt the new window in but be careful if you tighten down the window to tight it will break the put the door panel back on