If you completely replaced the serpentine belt you must detach the right side of the engine from its mount in order to get the belt back on its path illustrated on the engine's right side. If you are not replacing the belt and just want to slip it back on, then, just release the tension on the tensioner pulley near the rear of the engine and slip the belt back onto the tensioner pulley.
it is built into the back window
Need to know what is wrong with the bottom of back seat.
between the gas tank and the trunk underneat the back of the car
It is a pretty simple task. First take the negative battery cable off then remove the wires from the back of the alternator.Then remove the top bolt and then the lower bolt and pull the alterntor out. Good luck.
Remove the alternator belt on your 2000 Oldsmobile. Disconnect the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Put the new alternator on and reverse the process.
How do I take the back panel off
Remove the belt from your 2002 Chevy Cavalier alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
First of all, Do you have any specialty brake tools? Ben
No. Better to got wrecker's yard and get another.
You will need to remove the belt from your 2002 VW Jetta alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
To answer your question, Yes. I wondered the same thing, I went to BestBuy and I went to the automotive section, got on the Car Finder computer they have back there and it says the Oldsmobile Alero has a Double Din.
The alternator is on the passenger side of the car on the back side of the engine.