How to remove STEREO in 04 altima?
I removed mine by first removing the bezel around the Air Conditioning controls. First thing I did was open the door to the storage compartment below the Air controls. Then that part just pops off. There are no screws holding that on.
After you get that off there is one screw on the right hand side that is holding the top bezel in place. Note: the bezel that is around the radio runs all the way up the dash and will come off as one part. After you remove the one screw, it should pop right off.
Next, there will be four screws holding the radio in the dash. Take out those screws and the radio will come right out.
You need to remove the two screws underneath the woodgrain lookin face, and theres two more screws at the bottom hidden under the wood grain lookin plate around the shifter. You need to remove the one around the shifter to get to them. After you have removed the face plates there's four screws holding the stereo unit in, remove them, pull your stereo out and unhook the harness's.
1: Remove the cap lever transmission http://www.automotiveconcepts.net/store/dash.html?product_select=NSN-18A This is the piece number 12 of the figure 2: Then remove the four screws of the piece around the stereo and ready link to viewa picture for a little help http://www.mp3car.com/vbulletin/worklogs/102137-super-01-altima.html
You can easily remove your old car stereo without taking help of a car stereo expert. However, you need to follow some steps and need some tools to remove your old car stereo. You can save your money by following the steps for removing your car stereo otherwise you have to pay more money to the professional car stereo installer. Here are some steps to remove the car stereo safely. First of all, Read the…
First remove the ash tray - press the release inside the ash tray compartment and pull it out. then, remove the screws inside this ash tray compartment. then, remove the dash cover around the stereo. then, unbolt the bracket around your stereo. then, pull it out, and unplug it. put in your new stereo (you may need a wiring harness, or insert depending on what type of stereo you are putting in that you can…
Remove the from dash panel over the stereo. The whole things snaps off from over the stereo to over the stearing column. Once you remove that, look on both sides of the stereo and you will see 4 screws, remove those, pull out the stereo and unplug it. Ohh, it is really helpful to unplug the lighter, ashtray and defroster, you will see that when you start taking the panel off. Pretty easy, now, if…
you first have to locate the screws that hold down the faux wood cover over the stereo located at the bottom of the panel. then remove the panel and locate the screws that hold down the stereo itself. remove those and the stereo will become loose. be careful not to pull the stereo or let it drop after you loosen the screws because the stereo is still wired up. gl.