There are four bolts in the trunk two on each side and four on the bottom side of the bumper also.
No they are totally different.
If its like a 99, you have to remove the entire front bumper. That's what I had to do on mine. It was a total pain! Good luck!
I don't know but a 1989 year of the same model is 15 feet.
'99 Ford Escort ZX2: 6.5" front, 6x8" rear
Rear speakers are oval 6x8
www.teamzx2.com
== ==
HOW DO YOU REMOVE AND INSTALL A SPEEDOMETER SENSOR IN A 2001 FOR ESCORT ZX2,AUTO.
there are 4 engine mounts - left, right, front, and rear
To remove the front bumper on a zx2 , first you need to remove all of the fasteners on the top side of the bumper. ( open the hood and look straight down, remove all of those black plastic retaing screws.) After you remove the fasteners from the topyou need to lay down and get all of those small screws on the bottom/front of the bumper. Basically they just hold on the front splash guard but you need to remove them anyways. Once you take care of the top and bottom side of the bumper you need to remove both of the front inner fender wells. It's usually easier if you remove the wheels first. Once you remove the inner fender wells, get you a 3/8 drive ratchet wrench with a LONG extension. There are two (2) bolts on each side of the bumper, I believe they are a 13mm. Take out all four (4) bolts and then remove the front bumper cover and your done.
1st remove the pully then you will see the bolts to remove the housing good luck
It should.