How to replace a drive shaft gaiter on Renault 19 chamade?

Answer 1

Tape over the splines on the inner end of the driveshaft, then carefully slide the outer gaiter onto the shaft. pack the joints with the grease supplied in the repair kit. Ease the gaiter over the joint and ensure that the gaiter lips are correctly located in the grooves of the driveshaft and on the joint. With the coupling aligned with driveshaft, lift the lip of the gaiter to equalise air pressure. Fit the large metal retianing clip to the gaiter, remove any slack in the gaiter retaining clip by carefully compressing the raised section of the clip. check that the constant velocity joint moves freely in all directions before proceeding any further To refit the vibration damper when applicable lubricate the driveshaft with a solution of soapy water press or drive the vibration damper along the shaft using a tubular spacer which bears only on the damper inner bush until aligned with the mark made prior to removal. Refit the inner constant velocity joint then refit the driveshaft to the vehicle hope my info helps cheers Gary Australia