Ford Contour
1995-1999 Dodge & Plymouth Neons
Ford Expedition XLT
How To

How to replace the ignition module in a 1999 Ford Contour?


Top Answer
User Avatar
Wiki User
2010-05-16 18:54:14
2010-05-16 18:54:14

What engine? Ford Contour 2.0L DOHC eng. distributorless ignition are controlled by the main PCM

There is an ignition module on the 99 contour 2.0 with automatic transmission. It is shown in the schematics for this model.

User Avatar

Related Questions

The engine computer is the ignition module.

under the glove box where the firewall meets foot well

The 1999 Chevy S 10 pickup truck ignition module can be found on the firewall in the engine compartment. The ignition module will be on the drivers side of the firewall.

what would it could to replace time belt on a Ford Contour 1999?

how to replace ignition lock for 1999 vw beetle

you cant you have to get a bypass module.

No, not if it is not defective. If the ignition switch is defective then that is all you need to replace.

The Ignition control module is mounted under the hood. It is on the fire wall right beside the hood strut,

Pull the cover off the air intake box, unclip the two wires from the old module, remove screws. Screw in new module and replace wores and box. job done

How to replace power steering hose in 1999 ford excort

If you're looking for a stand-alone ignition controlmodule, there isn't one on the Windstar.This job has been transferred to the Powertrain Control Module (PCM) and its direct control of the coilpack.

typically this means the ignition module is bad

please give instructions on replacing the ignition switch on my 99 Malibu

No spark can be as simple as a ecm fuse blown, a bad ignition switch, defective ignition module or a bad coil.

where is the oil filter on a ford contour, 1999

Remove the wiring harness from your 1999 Mercury Grand Marquis ignition coil. Remove the ignition coil retaining screws. Reverse the process to install your new ignition coil.

The coolant sensor is on top of the engine. It is between the ignition coil and the tfi module.

Yes it does, from the year 1988 through early 1999 models.

Relieve the fuel pump pressure. Remove the fuel tank and on the top is the fuel pump module. Remove the module and replace with a new one.

Where is the oil filter located in a 1999 Ford Contour

The AM2 fuse protects the circuit between the battery and the ignition switch. After the ignition switch, it first powers the distributor, then the igniter module.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.