answersLogoWhite

0


Best Answer

To change the right front motor mount on a Mercury Sable. 1. you will need a jack and 22mm and a 5/8 socket. 2. you want to place the jack under the catalyst converter or somewhere on the motor that will lift the motor separatly from the crossbar that the front mount is attached to. 3. apply a little lift to the jack raising the car(3 or 4 hydraulics jack lifts). 4. using the 22 mm socket wrench take the bottom nut off the mount which is located under the right side of the crossbar. 5. using the 5/8 socket remove the top bolt that attaches the mount to the motor. 6. raise the jack 2 or 3 more times( giving you more room to move the old mount out). 7 . remove the old mount paying close attention to the way it is positioned, being sure not to put the new mount in wrong. 8. apply the new mount. 9. apply the top bolt and tighten . 10. lower the jack until the mount is seated correctly onto crossbar. 11. apply bottom nut and tighten. 12. glad i could help!

User Avatar

Wiki User

โˆ™ 2005-11-20 17:33:14
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar
Study guides
๐Ÿ““
See all Study Guides
โœ๏ธ
Create a Study Guide

Add your answer:

Earn +20 pts
Q: How to replace the right front motor mount on a 1993 mercury sable?
Write your answer...
Submit
Related questions

How do you fix motor mount from mercury sable?

There is no fixing a broken motor mount. Replace them with a new ones.


Where is the front motor mount on 2000 mercury villager?

At the front of the motor attached to the engine cradle.


How do you replace a front motor mount on a 1994 mercury villager?

Simply raise the car and support the engine on a jack, then unbolt it.


How do you replace the front right motor mount on a 2006 altima?

carefully


How do you replace motor mounts in a 97 Mercury Cougar?

Loosen the motor mount retaining bolt in your 1997 Mercury Cougar. Jack the engine up a few inches. Remove the retaining bolt and the motor mount bushing. Put the new bushing into the motor mount and reverse the process.


How do you fix motor mounts on 1997 mercury villager?

There is no fixing a broken motor mount. Replace them with a new ones.


The front motor mount on your 1998 2.5L V6 mercury mystique has broken 3 times Is there a heavier-duty mount to replace it with?

There is no heavier motor mount available for your vehicle. Inspect the other motor and or transmission mounts for wear. They should not break so easily unless there is some other mount that is bad causing that one to break.


How do you replace a front motor mount on a 93 Buick Le Sabre 3.8?

If you are speaking of the front mount, it is a transmission mount, and you must lower the subframe to R&R.


Where is the starter on a 2000 stratus?

Front of the engine, behind the motor mount.Front of the engine, behind the motor mount.


How do you replace the front motor mount and the dog bone mount on a 1993 Camry?

See if theres a shop manual at the library for free. d


Where is the starter located on a 1996 Dodge Grand Caravan and how do you replace it?

its behind the front lower motor mount


How do you replace the front motor mount on a 2001 Bonneville?

By taking the old one out and installing a new one...


How do you replace a motor mount on a 1995 Chevy Corsica?

You can replace your 1995 Chevy Corsica motor mount by loosening the motor mount retaining bolt. Jack the engine up approximately 3 inches. Remove the motor mount retaining bolt and the motor mount bushing. Put the new motor mount bushing in and reverse the process.


I have a 1998 Mazda Protege that shudders when you stop the car. It only happens once the car has stopped moving after I have driven it for a little while. Does anyone know what could cause this?

have your motor mount checked my protege did the same thing and it was the front motor mount have your motor mount checked my protege did the same thing and it was the front motor mount have your motor mount checked my protege did the same thing and it was the front motor mount


Location of front motor mount on 2000 mercury villager?

2000 Villager motor mount is located on the cross member dead center front of the vehicle. 2 bolts attached to the cross member pull out towards the alternator as well as the bolt through the mount itself. 17mm if I remember correctly.


Average price to replace an axel and put in new motor mount front and back?

With out knowing what car and engine, There is no answer.


How much to replace Mazda 3 motor mounts?

I had it done at the dealer, it was $260 for front mount on passenger side.


Where is the starter located on a 2001 Sebring?

It is on the front of the engine, kind of behind the motor mount.It is on the front of the engine, kind of behind the motor mount.


How do you replace the front strut motor mount on a 1993 Chevy Corsica 3.1 engine?

It is as simple as removong 2 bolts and replacing the mount. Goodluck, JOe


Fix motor rear motor mount dodge neon?

There is no fixing a broken motor mount. Replace them with a new ones.


How do you replace the bushings in motor mounts on a 98 dodge avenger?

You will have to replace the entire motor mount.


How do you replace the Mazda 626 motor mounts?

Each motor mount is held in place by a retaining bolt. The retaining bolt goes through the middle of the motor mount. Remove the retaining bolt. Jack the engine up. Replace the motor mount.


How do you replace a motor mount on 2002 Ford Ranger?

how do you change motor mount on 2002 ford ranger


How do you fix a motor mount on a 1995 gmc?

There is no fixing a broken motor mount. Replace them with a new ones.


How to repair motor mount?

No practical way to repair a broken motor mount. Replace it with a new one.