Turn the key on, but don't start the engine.
Push the odometer button so it is on the odometer, not trip1 or trip2.
Turn the key off.
Push and hold the odometer button and turn on the key, don't start the engine.
It will flash a dash a few times and then reset the MAINT REQD light.
It's easy when YOU know how!
HAs it had an oil change recently ? Also check oil level.
The Maintenance Required Light is not the same as the Check Engine Light. The Maintenance Required Light is telling you that there is scheduled maintenance that needs to be performed. It may mean it needs an oil/filter change. To find out what needs to be done look at the maintenance schedule in your owner's manual.
Look in the required maintenance book that came with the car. Probably 100,000 miles.
I have yet to do this on my 2005 Camry, but according to the Toyota Tech you must turn the key switch over (do not crank car) the check engine light will appear, now hold down the button on the odometer and at the same time turn the switch off than back on.
it simply means it's time for an oil change.
needs oil change... needs oil change...
There are at least two ways. The first one is just to disconnect the battery for couple minutes. The second one is to use the computer code reader to erase error computer codes.
Look in your owners manual. Instructions are listed.
The maintenance schedule for a 2005 Toyota Camry is available through Toyota. However, based on the average mileage for a vehicle of this age, the next maintenance comes at 110 thousand miles. It requires one rotation, one replacement, one fluid change, and three items for inspection.
Needs complete coolant and rear differential fluid flush.
Check your maintenance manual. It's in there.
Two reset the maintenance required light on a 2005 Honda Accord all you have to do is hold the odometer reset button on the gage panel for about 30 seconds while the key is in the on position. Not running just in the on position. it will reset.
Press and hold the odometer reset button while at the same time turning the ignition switch to on. Do not start the engine. After around 5 seconds the maintenance required light will go out.
With the ignition switch in the off position, hold in the hold in the trip odometer. Now turn on your key and you will see a series of zeros begin to appear. Once that stops, your maintenance light will be reset.
It most often means you need to change the oil and filter. Referred to your owners manual for the maintenance schedule of what needs to be done at the mileage on your vehicle now.
How do i reset a service engine light on a 2005 gmc c6500 cat engine
it is a 2005 Camry se v6...
Black electrical tape over the light lol no seriously I don't know except pulling the instrument panel and pulling the light bulb that is what I did on my truck
please tell me how to open Toyota Camry 2005 le, rear brake light bulb
This will be in your owners manual. You can also see the related question linked to the right for the 2005.
on the odometer there are 2 buttons press right and turn ignition without release this button 10 second light turn off
In the fuel tank. It is a permanent filter and no maintenance is required.
Timing chain, no maintenance required.
same as a 2005 odometer OS on turn key off hold reset turn key on loght flashes then turn off