The idler pulley on a 2003 Nissan Sentra 1.8 is changed by removing the engine accessories, removing the drive belts, and loosening the retaining bolt. The pulley can then be removed from the vehicle and a new one bolted into place.
N1gger
is it a pintara
Are you talking about the "idler pulley"? They are quite simple to change. Loosen the serpentine belt by using a socket on the center of the tensioner pulley, slide the belt off the idler pulley, use a socket to pull the center bolt of the idler pulley and replace the pulley with a new one.
When It no longer hold proper tension if the belt is squeaking then it is probably time to change it
You'll find an idler/tensioner pulley, which rides on an adjustable arm. First you have to loosen the locknut(14mm?) of the pulley , then tighten/loosen the adjuster rod (8mm?) to adjust the belt tension. Afterwards, tighten the locknut.
Take the belt off, un-bolt the idler pulley, bolt the new pulley on, and finally put the belt back on and Viola!!
To replace the belt on a Nissan Frontier, first loosen the idler pulley of the belt and remove the bolts. Then slip the replacement belt onto the pulley and put back the bolts.
Take the belt off, take the bolt off of the idler pulley, take the pulley off, put a new one on replace the bolt, and put the belt back on
I don't believe there is an idler pulley on that model, just a tensioner pulley
The idler pulley is mounted on a plate that needs to be removed. In order to remove the plate with the idler pulley, you must remove the engine mount to get out the idler pulley. To remove the engine mount, you need to jack-up the engine from the bottom of the oil pan (Note: place a piece of wood plank between the bottom of the oil pan and the jack). The idler pulley is mounted on a plate that needs to be removed. In order to remove the plate with the idler pulley, you must remove the engine mount to get out the idler pulley. To remove the engine mount, you need to jack-up the engine from the bottom of the oil pan (Note: place a piece of wood plank between the bottom of the oil pan and the jack).
go to youtube and type in ericthecarguy and change pulley
3 bolts above your oil filter may have to move belt a