If the a/c belt is not part of the Serpentine system it is not needed but if it is then your serpentine belt is the a/c belt the a/c probably just needs a freon recharge and will get it working again
remove compressor put a bypass pulley in its place replace belt
All you need to do is buy an alternator belt for a 2001 Honda Civic Dx. They came stock without A/C so it'll fit
how do you replace a/c compressor for 1996 honda civic 1.6L
No
The tension belt for a 1991 Honda Civic and located on the driver side of the engine. The pulley is right above the compressor.
Check to make sure the belt is routed around the compressor pulley. Also check the wiring connector at the compressor in case it was dislodged.
Any Auto Parts Store can provide you with the proper belt.
There is only one engine belt, which work for the engine and the AC compressor.
In Short Yes Did it on my own 01 civic Just need to get different belt for the alternator
your original belt length is 1735 mm, when you bypass a/c compressor new lenght will be 1400. thereby you have to use any 6pk1400 or 7pk1400 belts
The compressor pulley is the closest pulley to the ground in the set of pulleys driving the belt. Driver's side towards the front of the car underneath all of the pullleys and main drive belt.
It could be a worn out belt, a bad pulley or even a bad compressor and or compressor clutch.................