My son fitted a new windscreen washer motor /pump yesterday. It fits under the washer water reservoir and needs to be accessed from under the front off-side wing on my accent 1.5cdx W/2000 reg. awkward to get the plastic bolts out to remove the protecting cover.
2008 Hundai windshield washer pump?
probably in the tank...........
There are multiple YouTube videos that show a step-by-step tutorial on changing a windshield washer pump. You will use tools to take the screws and brackets off holding the washer pump on and replace it with a new one. It can be done at home by a novice.
follow the windshield washer fluid hoses back to the pump
Hyundais have a plastic reservoir that can be cut through by flying debris. OR it could be the pump. OR you could check to see if the hose has become disconnected.
in the wiper fuse box!!
You'll find it under the nearside wheel arch. Best to remove the wheel before accessing it.
On the bottom of the reservoir.On the bottom of the reservoir.
It's attached to the bottom of the washer fluid reservoir. Typically they put the bottle behind one of the fender splash shields
Begin by removing the hose from your windshield washer pump. Remove the windshield washer pump wiring harness. Remove the windshield washer pump retaining bolts. Reverse the process to install your new windshield washer pump.
Access the pump motor through the front passenger wheel panel
above the passenger side front wheel behind the inner fenderwheel skirt