autozone or napa
If it's an automatic, you'd need dexron.
The 1997 Chevy Cavalier starter bolt size is 9/16 by 3.5" inches long. You will need three starter bolts to secure the starter.
Need more info: Thank you.
It is behind the starter, Will need to remove starter to service it.
5 QTS. with new filter.
air, fuel, and spark is all you need.
Yes, but the big block may need a hi-torque starter.
Wrong starter, wrong fly-wheel, Bad starter drive, worn fly-wheel. Starter may need to be shimed.
Buy a starter for a L98 Chevy V8.
Very rarely have to shim a starter. If there is excessive noise or a disengagement problem it will need to be shimmed.
try a Chevy vega starter I had the same problem with a 82 Chevy 350 starter just have the one you took out rebuilt that way you know it will fit
You can as long as they are both 4.3l but you will need the intake and throttle body from the 88 as they are slightly different.
Make Sure your battery full charged sometimes the battery might be low or bad and it is not give it the spark it need to turn over what you can do is get under the car find the starter and the to nuts hodlind the starter you can hit them with a hammer gentlely and have someone hold the ignition in the start position and that usally will cause it to turn over if not then you need a new starter I have a 94 Chevy Lumina euro and it did the same thing
Need to know what year and what engine to help you.
It is in the side of the engine block behind the starter. You will need to remove the starter to see it.
Need to check the battery conections and the starter wires and starter.
Get a repair book at the library. And you need a wheel puller, a tool.
how do you put a solenoid when theres a solenoid on a starter .I have a1981 Chevy scotdale truck and when the truck is warn i try to restart it hestiates when i do that a mechanic shop tells me that i need to by pass my starter so how do i do that . show me a video if you have one. thanks?
You will need to DRILL it out and if you mess up the threads then you will need to retap the bolt hole.
Could be, bad battery, bad starter, in need of tune up, need more info.
Bad starter is easy: when you turn the car on provided your battery is good, you will hear a click in the engine compartment, but the car will not start.
I have a 1996 Chevy extended cab cheyenne pickup. i need to know how to install a door handle on the passenger side.
I need a wiring diagram for the battery, starter, and solenoid of a 1971 Chevy truck, 350.
It is behind the starter and has 1 bolt holding it in the side of the engine block. You will need to remove the starter to see it.
Did you use the starter from the 85 model engine?? If you did then it is the wrong one for the early model engine, And you will need to get a starter for a 77 model engine, and it may still need to be shimed. And yes GM did make 2 different fly-wheels but that is not your problem.