Other than the fact that it makes it easier to steal, no, it will hurt nothing.
on my Oldsmobile the radio will continue to play with ignition off until the door is opened
you need to have the ignition barrel in the on position otherwise you cant to it.
Well ignition points is the minimum temperature at which a substance will continue to burn without additional application of external heat. Also called kindling point.
You can reset the theft system in your 1994 Cadillac Deville by putting the key into the ignition. Turn the ignition to the auxiliary position, without starting the engine. Leave it in this position for 30 seconds.
Perform the following steps in order. 1. Turn on ignition without starting and wait 7 secs then turn to acc position and wait 4 secs. 2. Turn on ignition without starting and wait 7 secs then turn to acc position and wait 4 secs. 3. Turn on ignition without starting and wait 7 secs then turn to acc position and wait 4 secs. 4.Turn on ignition without starting and wait 7 secs then turn to acc position and wait 3 secs. 5. Turn on ignition without starting and wait 7 secs then turn to acc position and wait 2 secs. 6. Start car and wait 3 secs then turn off wait 3 secs and start car. Took me 2 tries as I was not getting the timing right...but it worked.
This may sound ridiculous... but force the the ignition switch until the detent "breaks" and you can turn the ignition switch without the key. The risk here is that you could possibly break the assembly that the ignition switch inserts into. If you can get the switch to rotate from the lock position one position clockwise, then you can release the switch from underneath the steering column and pull the switch out. The alternative is to have a locksmith get the ignition switch to rotate one position clockwise and then you can remove the switch and replace it with a new one from any auto parts store.
1. Close all vehicle doors. 2. Insert the key into the ignition. (do not turn key) 3. Hold down the power UNLOCK button on the driver's door panel-continue to hold down until instructedto release in step 9. 4. Perform steps 5 through 8 in fairly rapid succession. 5. Turn the ignition switch to the ON position (as far as you can go without starting the engine). 6. Turn the ignition switch to the OFF position. 7. Turn the ignition switch to the ON position. 8. Turn the ignition switch to the OFF position. 9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically to confirm verification mode activated. 10. if your vehicle responds to step 9, This confirms 100% that your vehicle has factory keyless entry options this remote will work for your vehicle guaranteed.
Turn your ignition switch to the auxiliary position, without starting the engine. Leave the ignition switch in the auxiliary position for 30 seconds.
1. Close all vehicle doors.2. Insert the key into the ignition.3. Hold down the power UNLOCK button on the driver's door panel-continue to holddown until instructed to release in step 9.4. Perform steps 5 through 8 in fairly rapid succession.5. Turn the ignition switch to the ON position (as far as you can go without starting theengine).6. Turn the ignition switch to the OFF position.7. Turn the ignition switch to the ON position.8. Turn the ignition switch to the OFF position.9. Release the power unlock button on the door panel. The vehicle will lock and unlockthe doors automatically.10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously untilthe door locks and unlocks.This step may take up to 30 seconds.11. Repeat step 10 NOW for each additional transmitter (including any existingtransmitters).12. Turn the ignition switch to the ON position in order to exit the transmitter programmingmode.
With the ignition OFF press and hold the odometer reset button while at the same time turning the ignition to the on position without starting the engine. After 5 seconds the light will reset.
The Honda Civic 2003 actually(unlike popular thought) does indeed have a reset. Place your key in the ignition and hold down the toggle switch before turning your vehicle to the 'ON' position (without the motor running). Turn the key to the 'ON' position and continue holding down the toggle switch for about 10 seconds. This should reset your airbag light!
With the ignition OFF press and hold the odometer reset button while at the same time turning the ignition to the on position without starting the engine. After 5 seconds the light will reset.