0
I think you mean LITERS and FILL.
You have to know the volume of the pool in cubic meters. Multiply its length x height x width to get cubic meters. Multiply that by 1000 to get liters.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How many cubic yards of fill for a 24' by 6' round pool?
To fill in this size pool you'll need 100.5 cubic yards of material. If you mean how many gallons of water to fill the pool, you'd need 20,300 gallons of water to fully fill it.
How many gallons are in an underground pool?
To say my estimate, I would say 6,000 gallons or more of water can fill up a whole swimming pool. I have an underground pool myself, and I've seen that It takes a pretty long time to get filled with the hose. I also believe it depends on how big the pool is. Ex. Small: 2,000 gal. Small: 2,000. Medium: 3,000. Large: 6,000. I have a large pool. Extra Answer: How many bathtubs can fill an underground pool? I would say about...well, how big is your bathtub? It would take about 7 gallons to fill a small tub, 10 to fill a medium, and a large would be 15. So, depends on size. Large would be 1,000 bathtubs, medium would be 900, and small would be about 800. Thanks for listening to me! To know I answered, look for Extra Answers under the regular ones. Thanks again!
What metric unit is used to measure the capacity of a swimming pool?
The base unit of volume is the cubic metre.
On a monthly basis how much top-up salt should be added to a saline system swimming pool of approximately 75000 liters?
This would vary on conditions for e.g if the pool overflows because of rain more salt needs to be added the amount of water lost through backwashing is another reason. Evaporation is not a problem as this leaves the salt behind in the pool. a salt tester for the water is required to work out the amount of salt needed. these are available from pool shops. B T W you should not have to add salt to the pool on a monthly basis if you have done the job correctly to begin with.
How many gallons of water is needed to fill a pool 15' diameter by 42 deep?
Is 42 in inches or feet? I've answered the problem below for inches since that makes more sense for a pool. Volume of pool = area of pool * depth V = pi*r^2 * depth = 3.14*7.5*7.5*3.5 = 618 cubic feet The volume of 1 gallon of water = 0.133680556 cubic feet. Therefore, the # of gallons of water in the pool = 618/0.133680556 = 4623 gallons of water In actually, because of significant digits in the depth and diameter of pool, the answer would be approximately 4600 gallons of water
What size pool would 110000m liters fill?
29.06 gallons.
How many liters of water in a pool 12 by 23 feet?
That depends on what depth you want to fill the pool to !
Would it take more hectoliters or decaliters to fill a pool?
hetoliters
How many liters of oil would fill a swimming pool?
That depends on the size of the pool is it a 2 stroke or a 4 stroke pool
Is 2000000 ml of water enough to fill a swimmimg pool?
Two million milliliters of water is enough to fill a swimming pool, depending on its size.
How many liters of water to fill your pool 8 meters by 4 meters by 2 meters?
1000litres
How many liters of water to fill your pool 7 meters by 3 meters by 2 meters?
42,000
How many liters of water in 15 foot round x 48 inches deep pool?
Assuming the pool is circular, and that you fill the pool to the brim, the pool will contain about 2028 liters of water. However, if you want to leave 4 inches for the water to have some room to splash around, that'll cut that number down to 1859 liters.
How many liters of water in 7metre x 4metre x 1.3metre deep?
The volume of the pool is 36.4 cubic meters. There are 1000 liters in a cubic meter. You will need 36400 liters to fill the object.
What is more than ten liters?
A swimming pool, a kilolitre
How many liters of water to fill a pool 8meters by 4 meters by 1.5 meters?
volume of pool=lbh volume =8 X 4 X1.5 =48 m^ 3
How many liters would it take to fill an 8 meter by 4 meter pool that is 2 meters deep?
It would take 64 m3 of water, which is 64000 liters or about 16,907 gallons.
