Watts = Amps x Volts. 33 x 240/1000 = 7.9 Kw
The output of an electric fencer is a high voltage pulse of DC voltage.
36V to 72V
The effect of diode voltage drop as the output voltage is that the input voltage will not be totally transferred to the output because power loss in the diode . The output voltage will then be given by: vout=(vin)-(the diode voltage drop).
The terminology would typically reference a device such as a power supply, charger, diverter or transformer. The Input Voltage is the voltage supplied to the device to make it work. The Output Voltage is what the device supplies to an application. For example, a power supply for a laptop might convert 120 VAC to a voltage like 19.5 volts (A Sony Laptop) for charging a laptop battery.
The ratio of output windings to input windings determines the ratio of output voltage to input voltage. The ratio of current is the inverse.
At 240 v and 50 amps the power is 12 kW because 240x50 is 12,000.
The output of an electric fencer is a high voltage pulse of DC voltage.
At 240 v and 50 amps the power is 12 kW because 240x50 is 12,000.
In Voltage Shunt Amplifier, the Output voltage is supplied in parallel with the Input voltage through the feedback network.
The watts is the volts times the amps So 208 x 50 watts, or 10.4 kW.
RPS is only the voltage& power controlled device. it can only used for set the input for our wish A device which can change its output according to the voltage supplied to it is called a voltage controlled device.ex. a voltage controlled current source,or a field effect transistor. In a voltage controlled current source the output current changes as the voltage supplied to it changes.
The formula you are looking for is W = A x V. Then divide the wattage figure by 1000 to change watts to kilowatts.
36V to 72V
A voltage regulator controls the output voltage of a generator. This ensures only the specified ÊvoltageÊis supplied thus preventing damage to the circuit and other electrical appliances.Ê
RPS is only the voltage& power controlled device. it can only used for set the input for our wish A device which can change its output according to the voltage supplied to it is called a voltage controlled device.ex. a voltage controlled current source,or a field effect transistor. In a voltage controlled current source the output current changes as the voltage supplied to it changes.
That is an electric AC or audio output, where the voltage is measured in volts rms. Scroll down to related links and look for "dB conversion (decibel)". Look there in the middle at this headline: "RMS voltage, peak voltage and peak-to-peak voltage".
decreasing the voltage and increasing the ohms