If the atmospheric pressure is 29.4 inches of Mercury the corresponding inches of mercury is: 880.
Millibars. Inches of mercury or feet of water
mmHg represents the height of a column of mercury (Hg) in millimeters (mm) (as opposed to inches of mercury (inHg)). Since there are 10 mm (millimeters) in a centimeter, simply divide the mmHg by 10 and you find that 535mmHg is 53.5 centimeters Hg (cHg?).
It is used in the barometer because it is the densest liquid known, requiring only 33 inches of mercury to indicate atmospheric pressure. Water on the other hand would require 39 feet to indicate the same pressure. It is used in thermometers for a different reason. The expansion of mercury is a stable amount. Meaning it changes in volume the same amount from 0 to 1 degrees as it does in volume from 100 to 101 degrees, making it a desirable fluid for scaling thermometers. Presently in the US it is illegal to manufacture these devices using mercury.
If you were at sea level, the weight of the air pressing down on you would be 1.03 kilograms per square centimeter.or 1013.25 millibars.
I'm not sure if this answer is the kind of answer you're looking for, but basically, you would have to use a much larger amount of water than mercury to get an accurate reading of atmospheric pressure. This is because water is not nearly as dense as mercury, so it takes much less atmospheric pressure to raise the water up the tube in a water barometer. This results in water rising much more easily than mercury. Obviously, then, a water barometer would have to be much larger than a mercury one. Since mercury is more dense than water, mercury barometers are much smaller. So, if you put water in a mercury barometer instead of mercury, the reading you get would be way too high.Air pressure at sea level is about 14.7 pounds per square inch (psi) and can push a column of water almost 33 feet high, but it can only push mercury 30 inches high. Roughly, ever inch of mercury equals a foot of water.
It refers to the atmospheric pressure which, in this case, is measured in inches of Mercury on a mercury barometer
It refers to the atmospheric pressure which, in this case, is measured in inches of mercury on a mercury barometer
Inches of mercury, as it relates to atmospheric pressure.
18,920 mm of mercury at 24.9 ATM
The atmospheric pressure of 29.97 inch of mercury (32 °F) is 761.238123 millimeter Hg (0 °C) or 1.001629 atm. Scroll down to related links and use the nice calculator "Conversion of pressure or stress units".
The Compound Gauge measures above and below atmospheric pressure (in psig and inches of mercury).
Simply put, atmospheric pressure is the force exerted on a measuring point by the weight of the air molecules on top of that point. Standard atmospheric pressure, measured at sea level at 59F or 15C, is used as a reference point and is equal to 29.92 inches of mercury or 1013 millibars of pressure.
Atmospheric pressure will support a column of mercury to about 760 mm. Mercurial air pressure is described as '760 mmHg'. As air pressure changes , the height of this column will also change. If you did it with water, the column would have to be about 34 feet (10.2 metres) in height.
millimeters mercury? ____________________ "mm Hg" is the abbreviation for "Millimeters of Mercury. It is a measure of blood pressure. Millimetres of mercury (Hg is the chemical sysmbol for mercury). This is normally a measurement of atmospheric pressure - the number of millimetres of mercury in a sealed glass tube supported by air pressure. Standard atmospheric pressure (101.325kilo Pascals) is equal to 29.92 inches of mercury (inHg) or 759.968 mmHg.
Those are (somewhat outdated) pressure units.
Atmospheric pressure varies with altitude and air density. Average sea-level pressure is 101.325 kPa (1013.25 mbar) or 29.921 inches of mercury (inHg) or 760 millimeters of mercury (mmHg).
It just means that the pressure you're measuring is approximately the same as Earth's air pressure at sea level.