The anti-lock brake system in some vehicles can malfunction and cause an your motor to lock up.
The MAP (Manifold Absolute Pressure) Sensor on a 2000 Chevy Suburban is located on the very top of the motor. It is all the way to the back of the motor. There is nothing behind it.
at the beginning of the air filter(air box) closest to the motor
Yes.
The encoder motor sensor is found inside the front of the transfer case. The sensor motor assembly is removed with 3 - 15mm bolts after the front driveshaft and electrical connector are disconnected. The encoder motor sensor is under the big gear on the back of that assembly plate.
where is the camshaft sensor on a 2000 Chevy sliversdo with a 4.8L V8 motor
Were is the temperature heat sensoe on a 454 chevy motor.
The horsepower rating on a 1986 Chevy Suburban with a 350 motor is between 180 and 200. This allowed these sport utility vehicles to perform well when weighing in excess of 5,000 pounds.
Chevy did not use an inertia switch. It don't have one.
The Oil filter in under the motor of the truck..
About 3 hrs. To take it out.
Wright above the passengers feet under dash.
It should hold 6 qts.