answersLogoWhite

0


Best Answer
Copy

you don't run a new 120 line

2006-07-17 10:51:08
This answer is:
πŸ€“
🀯
πŸ€”
User Avatar

Add your answer:

Earn +5 pts
Q: If you have low voltage lights in your yard and you want to install a decorative street lamp how do you increase the voltage to power the 120V street lamp?
Write your answer...
Submit

Related Questions

When voltage increase then current will be?

it depends on what type of load. Motor amperage will drop off as voltage rises. loads such as lights will increase amperage with voltage rise.


What is the science behind how decorative twinkling lights work?

Decorative blinking lights work in a series. As long as the series is completed and a blinking specific light is in place you have a beautiful display of blinking decorative lights.


How many lights can be on a 15 amp circuit?

Depends on the wattage of each light and if ONLY lights will be on the circuit and no outlets. On a 15 amp circuit at 120 volts it is rated at 1800 watts. But the NEC restricts you to only a load of 80% of the circuit so that means you can only load the circuit to 1440 watts. Assuming you are installing 75 watt can lights you can install 19 can lights. Install 65 watt can lights and you can install up to 22 can lights. But if you installed fluorescent can lights pulling 14 watts each you can install 102 lights. Install 15 watt LED bulbs and you can install 96. You will have line voltage loss so be aware of that on any long run. The fact is that someone could come along and remove the fluorescent or LED bulbs and install regular bulbs. So my advice is to assume each light to be a 75 watt light and limit the circuit to no more than 19 lights.


How do you install bicycle lights?

These bicycle lights are really easy to install on to your bike See link below


What are some types of decorative Christmas greenery?

One of the most common types of decorative Christmas greenery is Christmas lights. Christmas lights are used throughout the world in almost any home that celebrates Christmas.


Why do lights blow when RPM increase on 49cc scooter?

When engine's rpm increase, the elctric generator of the scooter or motorcycle and any other vehicle will rotate also at high speed. It will produce more electricity the more you idle your engine. Some motorcycle's and scooter's voltage regulator is not accuratetely suppress the excess electricity coming from the electric generator (it is maybe due to price competition between vehicle manufacturers). Over-voltage will burn-out your lights and it shorten the life of your battery. So I suggest to modify your voltage regulator but only well known electronics technician or engineer know how to choose the suitable regulator and how to install it.


Describe the advantages of using a parallel arrangement of decorative lights rather than a series arrangement?

The advantages of parallel arrangement decorative lights are:More brightnessWhen one light bulb blows out, the other ones do notLast much longer than series lights


Trailer Lights?

form_title= Trailer Lights form_header= Install trailer lights with help from pros. Do you have a commercial trailer?*= () Yes () No What color lights do you want to install?*= _ [50] How many lights do you want to install?*= {1, 2, 3, 4, 5, More than 5}


What are neons most practical uses?

Usually for making lights, decorative or practical.


How can I install undercarriage lights so that they turn on with my dome lights in a 2005 Chevy Equinox?

You can install undercarriage lights to have them turn on with your dome lights on a 2005 Chevrolet Equinox by installing the LED tailgate light bar.


What types of construction lights are available?

The types of construction lights that are available are high voltage beam light and a low voltage beam light. The high voltage beam light shines a lot brighter.


Are LED lights considered low voltage?

LED lights are considered low wattage.


Low voltage lights equivalent to 110 volt lights in watts?

Watts are calculated by multiplying the voltage by the amperage. To calculate the wattage you need both these numbers


Where do you find picts of how to install fog lights on a 2000 Honda Civic?

need diagram to install 2000 Honda civic syder fog lights


Where can someone purchase low voltage garden lights?

Low voltage garden lights are a great way to light up your garden without using a lot of electricity. Lowe's, Home Improvement, TruValue sell garden lights.


What cars come with HID lights installed?

No, generaly the car lights cums with elargins if we want HID lights we can install...it


What is the cause of a earth wire in lights having voltage in it?

ground


How do you install fog lights on a 2001 Daewoo Lanos Sport?

Follow the insturctions that will come with the lights.


How much are neon lights?

The cost of neon lights varies depending on the size and intricacy. As of August 2014, a simple, decorative neon light for the interior of a car is $15.


How do you install fog lights in a car?

Astra mk5


How much voltage loss with a dimmer switch when used for lights?

There is no loss in voltage. Voltage is constant (dependant on your supply). The dimming is as a result of of a reduction in current (ampage)


When you add a second battery to a series circuit what happens?

Adding a seound battery to a series circuit will increase the voltage, and require less current to keep the lights (if there are any on) as bright. Say you have a 6v battery, then you add another 6v battery. the voltage of the circuit would be 12v


Do lights in a parallel circuit burn brighter than in a series circuit?

Yes, since each light would get the full voltage. Be careful if you actually carry out this experiment, that the lights don't get too much voltage. If the voltage is (for example) 110 Volts, and the lights are built for 110 Volts, you would have no problem; in a series circuit they would simply get dimmer.because the wires are togetherAnswerNot necessarily. It depends upon the voltage ratings of the lamps, and whether the voltage across each lamp matches their voltage rating.


Why it might be useful for a set of decorative lights to be connected in a parallel circuit instead of a series circuit?

They would be put in a parallel circuit because in a parallel circuit, if one of those lights were to go out, then the others would stay lit. This is because in a parallel circuit, electricity is ran through multiple paths to the lights and each light is on its own parallel wire. If the decorative lights were on a series circuit then if one went out, they all go out.


How to install fire lights on trucks and cars?

You can learn how to install fire lights on trucks and cars at www.projectresponder.com/. Another good site is blog.seattlepi.com/seattle911/archives/153900.asp