What year is the Ford Explorer ? There could be a separate fuse for the lower brake lights
Short to ground.
how can i fix lic plate lights not working when bulbs and fuse are good?
It should be the same type of bulbs that are in the side marker lights. They should be #194 bulbs if memory serves.
check that you have double filament bulbs in tail lights
The brake lights are a separate circuit from the other lights. Check the fuses and bulbs. If fuses and bulbs are okay I would suspect the brake light switch is at fault.
realign the head lights, check battery termninals
Bulbs burned out? Blown Fuse? Bad switch?
check the bulbs themselves they sometimes short out internaly & cause feedback also check sidemarker lights I have changed all bulbs and fuses! Wiring problem???
Have an electrician check the wiring that goes to the brake lights in the trunk of the car.
maybe fuse or broken wire between lights and relay
If the brake lights are not coming on in your car and you have changed the bulbs and the fuses with no results, you could also check the wiring in your '98 Chevrolet Lumina. The wires may be damaged or even broken.
on some cars the tail lights and brake lights are totally different bulbs gain access to the bulbs and have someone push the brakes so that you can determine which bulbs are the brake lights and replace the tail lights
check your bulbs
Bad bulbs, bad switch located either on steering column or on transmission
Did you check the switch on the brake pedal assembly?
sometimes when the lights blow out the fuse also blows out. check the fuse!!
Does it have trailer light wiring also? check that too.
Check the bulbs - they are double filamented- smaller for stop and larger for tailights
you should try checking the fuses and replacing the bulbs the fuses for thos lights should only be about a 10 or a 15
What size bulbs in vanity mirror on a 1999 ford explorer?
Remove bumber and headlights. Then the bulb(s) is easily changed. You should replace all bulbs at once when the lights are on the living room table. :)
If the night running lights have failed the bulbs should be checked. Find the bulb housings and remove the parts. After the bulbs are replaced check the lights.